Compatible with bosch classic plus drive system with 36 v, power information: 13 ah/17 ah / 468 wh/612 wh battery downtube and carrier version, dimensions downtube version 13 and 17 ah: 295,8 x 85,0 x 129,7 mm, dimensions carrier version 13 and 17 ah: 392 (9 pages)
Summary of Contents for e-bike vision 10040
Page 1
MANUAL / SAFETY NOTES FOR YOUR E-BIKE VISION POWERPACK, COMPATIBLE TO BOSCH* ACTIVE (PLUS) / PERFORMANCE (CX) DRIVE SYSTEM WITH 36 V Power information 17.1 Ah / 624 Wh Battery downtube and carrier version 20.7 Ah / 745 Wh Battery downtube and carrier version 308.9 x 88.0 x 131.3 mm...
+49 (0) 6021 3289288 Email: info@akkuvision.de Web: www.akkuvision.de E-Bike Vision is a trademark of the Akku Vision GmbH Date October 2021 Akku Vision - Manual PowerPack compatible to Bosch* Active / Performance S. 2 / 9 Version 01 *Bosch is a trademark of the Robert Bosch GmbH...
Please take some time to read this manual carefully. It contains detailled information about handling of your battery, its functions and its care, as well as the usage of the E-Bike Vision fast charger. For further questions, do not hesitate to contact your dealer or get in contact with us via our homepage.
Common safety notes for PowerPacks Please read this manual carefully! Please consider the safety notes! PowerPacks are no toys. Keep them away from children! • Don’t change anything on the battery. Especially, consider that you are not allowed to open the battery, or •...
Safety notes for charging Please pay particular attention to the following points when charging: Connect the charger only to a suitable mains supply. • Do not charge NiCd, NiMh or primary cells! • Use the charger only with the appropriate PowerPacks of Akku Vision! •...
Your new battery can be charged with the original charger, which was included when you bought your ebike. When using the E-Bike Vision charger in combination with the additional available charging adaptor or when using the original charger, you can charge your battery inside or outside of the ebike.
You installed your new E-Bike Vision PowerPack correctly in your eBike and locked it (do not forget to remove the key)? Then turn on the drive system by the capacity indication button or via the ON /OFF switch of your HMI. The drive system now read the current capacity of the battery and will calculate the approximated range, based on your previous driving profile.
Maintenance The life span of your PowerPack depends mainly of your carefully usage. Never use the complete capacity, but use it regular and store it at 17° C. That way, your battery will thank you will longer life span. With increasing aging your battery will loose capacity, anyway. Do not try to refresh or exchange the cells on your own! Get in contact with our service department.
Need help?
Do you have a question about the 10040 and is the answer not in the manual?
Questions and answers