HOMCOM 800-137V70 Assembly Instruction Manual page 6

3.Flat Position: The Upper Housing is
open and level with the Base, Hinge
Release creating two cooking surfaces.
Use the product in this position when
grilling larger amounts of food. To
flatten, pull up on the Hinge Release
and push the Handle down.
Inserting/Changing Plates:
1. Slide the notches in the rear of the lower Grill Plate into the
retaining hooks, then press down on the front of the plate to snap it
into place. Repeat to attach the upper Grill Plate.
To Use
WARNING: The Grill Plates and metal surfaces of the Upper Housing
and Handle will become very hot during use. To avoid a burn hazard,
wear protective oven mitts or heat-resistant gloves when using and
touch only the black portion of the Handle.
NOTICE: Use only heat-resistant wooden, plastic, or silicone utensils to
add/remove food. Do not use a metal utensil as it may scratch the
surface of the item.
NOTE: During the initial use this item may emit some light smoke. This
is normal and will subside with further use.
Contact Grill:
Use to cook burgers, boneless or thin pieces of meat and fish, and
vegetables. In the "Closed" position, food will cook quickly since both
sides cook at the same time.
1. Set the product to the "Closed" position and plug the power cord into
a standard electrical outlet. The Power Indicator will illuminate red,
indicating power is on.
2. Place a Drip Cup below the drip spout.
3. Turn the Temperature Control to the desired setting, as listed below
EN
Setting Temperature
Min close
Max 425°F(230°C)
Hinge Release