SeaSoft MobilSwitch-Micro-C Manual

MobilSwitch-Micro-C
The
MobilSwitch-Micro-C
signaling and remote control. It has
voltage and high current
any PC or notebook. The device notifies the users via pre-configured SMS-s and voice calls, and it has an
optional acknowledging function. The relays can be triggered by user-configured SMS-s or free voice calls
for dedicated users. The relays can be configured to operate in
relays are turned off automatically within a time interval) or
are performed with separate commands). It can be programmed for max.
as a GSM remote signaling, remote controlling device, either for industrial purposes or home applications,
such as remote signaling and controlling security device. The power supply of the device has industrial input
range of 10V-30V DC
configured phone number, and the device operation can be checked with its built-in signal-of-operation
function. It has two variants: either with built-in aerial or

1. Operation:

PC-s with a single micro-USB
GSM module that can be operated with any prepaid or subscription-based
low-current variant is called MobilSwitch-Micro, or
SeaSoft kft.
module is a general, industrial-grade GSM module, developed for remote
2 inputs
relay outputs. It can be programmed with its own software called "Unified" from
and draws min. 500mA
cable. The MobilSwitch-Micro-c
www.seasoft.hu www.mobil-control.eu
Industrial GSM signalling and remote control module
with 2 inputs and 2 high current relay outputs
which are activated by voltage-less contact, and it has
monostable
bistable
current. The carrier's SMS-s can be forwarded to the user-
magnetic aerial with
RG-174
The module holds its configured and
programmed data even after power-off. In
the case of carrier problems or cellular
signal loss, the device switches itself off
then on, re-connects to cellular network
and restores normal operation. The device
comes with an enclosure and carrier-
independent GSM module in DIN rail
enclosure with a small SMA connected
aerial or with external magnetic antenna.
configuration software that can be down-
loaded from website:
Our devices can be configured with any
has a carrier-independent, industrial-grade
Micro-a and available also with two antenna-variations.
T: (62) 406-405
mode (after switching on, the
mode. (switching the relays on and off
8 phone numbers, and can be used
SMA
The device comes with our free
nanoSIM cards. The low voltage
M: (+36) 30 255 7688
2 high
connector.
www.seasoft.hu
F: (62) 405-969