Label i-FeedGoodL LABCH500IP Technical Manual

Cellular modem

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

i•FeedGood

Cellular Modem

LABCH500IP

Technical Guide

Table of Contents

Need help?

Do you have a question about the i-FeedGoodL LABCH500IP and is the answer not in the manual?

Questions and answers

Summary of Contents for Label i-FeedGoodL LABCH500IP

Page 1 i•FeedGood Cellular Modem LABCH500IP Technical Guide...
Page 3: Table Of Contents
Table of Contents General Information Important safety standards ............... 2 Mechanical installation ..............4 Positioning of the connection cables ..........5 Positioning the antenna ..............6 Connections ..................7 How to connect the modem to i•FeedGood ....... 7 Installing the SIM card ..............8 How to remove the SIM card ............
Page 4: General Information
General Information Before using the modem it is important to read the information provided in this Guide to avoid seriously harming yourself or damaging the modem. Note: for further information, contact your Distributor or send a support request to the address support@labelgroup.com. Important safety standards •...
Page 5 Disconnect the connection cable in the following situations: • If the connection cable or connectors are worn or damaged. • If there is any liquid inside the modem, including condensation. • If the modem case is damaged or broken. • If the vehicle battery needs to be recharged.
Page 6: Mechanical Installation
Mechanical installation The modem must be installed on a flat, stable and vibration-free surface. It is recommended to follow the following guidelines: • Do not install or place the modem near heat sources or strong magnetic fields (motors, magnets, etc.). •...
Page 7: Positioning Of The Connection Cables
Positioning of the connection cables To ensure the best operation of the modem it is necessary that the connection cables are correctly connected and positioned. Improper positioning of the cables can significantly reduce the performance of the modem. It is recommended to follow the following guidelines: •...
Page 8: Positioning The Antenna
Positioning the antenna The modem is equipped with a SMA female antenna connector suitable for connecting different types of antennas. Normally, a high performance antenna is provided with the modem, which may be easily installed on a wall by using the supplied bracket.
Page 9: Connections
Connections How to connect the modem to i•FeedGood The modem is connected to the i•FeedGood scale through a cable with two straight M12 connectors, M/F 8 pole. The female connector must be inserted into the J1 connector of the modem, while the male connector must be inserted into the COM A connector of the scale.
Page 10: Installing The Sim Card
Installing the SIM card The modem requires, in order to function, a SIM card enabled for data traffic provided by a mobile phone provider. Additionally, the SIM card must have the PIN disabled. To install the SIM card, proceed as follows: Open the case.
Page 11: Ec Declaration Of Conformity
EC Declaration of Conformity The modem complies with the essential requirements of RED 2014/53/UE Directive and Part 15 of the FCC Class B Rules. As a quality assurance, the modem has also been tested in accordance with the SAE J1455 Environmental Standards and MIL-STD-810 Military Standards.
Page 12: Description
Description Using a LABCH500IP modem connected to the i•FeedGood scale, it is possible, in wireless mode, to send the Daily Records to the FarmManagerWeb or to import the Recipes created with FarmManagerWeb into the scale. For further information consult the “Data Transfer” chapter of the “i•FeedGood Technical Manual”...
Page 13: Descriptions Of Leds
Descriptions of LEDs On the upper front of the modem there are 7 LEDs that indicate the mode of operation of the modem. LED Indicators Meaning Indicates presence of DC Power power when lit. Not used. Indicates established cellular data connection when lit.
Page 14: Annex A
Annex A Technical Specifications Radio Technology ................HSPA+ Frequency Band (MHz) ........850/900/1700/1900/2100 Interface ..................... RS232 Power Supply Voltage .............. 7 ÷ 32Vdc Power Consumption ..............Max. 10W Operating Temperature ............ -30°C ÷ +70°C Case ....................ABS (V0) Degree of Protection (EN60529) ............IP66 Weight ....................
Page 15 Label will not be held liable for any printing errors. Label will not be held liable for direct or indirect damage to persons, animals or property resulting from misuse or improper use of its products and for damage resulting from failure to use or suspension from using the products;...
Page 16 Label S.r.l. Via Don Mazzucotelli, 6/A 24020 Gorle (BG) ITALY Phone +39 035 30.28.12 Fax +39 035 30.28.15 support@labelgroup.com www.labelgroup.com...