Advertisement
Table of Contents
5
Insert 1 x wheel and 1 x washer. Fix the leg with the small screw in the bearing.
6
Insert the glider into the hole in the bottom of the leg.
Repeat step 1 till 6 for the opposite leg.
Tribù nv
Langendijkstraat 5a
3690 Zutendaal
BELGIUM
www.tribu.com
info@tribu.com
VAVLW01 - 20-04-2016
ASSEMBLY INSTRUCTIONS
VIS A VIS LOUNGER WHEELS
01741
Advertisement
Table of Contents
Related Manuals for TRIBU VIS A VIS 01741
Summary of Contents for TRIBU VIS A VIS 01741
- Page 1 Insert 1 x wheel and 1 x washer. Fix the leg with the small screw in the bearing. ASSEMBLY INSTRUCTIONS VIS A VIS LOUNGER WHEELS 01741 Insert the glider into the hole in the bottom of the leg. Repeat step 1 till 6 for the opposite leg. Tribù nv Langendijkstraat 5a 3690 Zutendaal BELGIUM www.tribu.com info@tribu.com...
- Page 2 CONTENT ASSEMBLY INSTRUCTIONS Put the lounger upside down on a protective surface. Remove the glider from the leg Attach the short leg to the lounger using 1 x metal washer and 1 threaded rod. closest to the side table. Now unscrew the leg with a box spanner. Use a box spanner to fix the short leg.
Need help?
Do you have a question about the VIS A VIS 01741 and is the answer not in the manual?
Questions and answers