Replacement Procedure - Panasonic ET-LAF100A Operating Instructions Manual

Replacing the lamp unit

Replacement procedure

1) Make sure that components in the vicinity of the lamp unit are cool.
2) Use a Phillips screwdriver to turn the lamp
until the screws turn freely and remove the
3) Use a Phillips screwdriver to loosen the two
freely, and then hold the handles of the lamp
unit and gently remove the lamp unit from
4) Insert the new lamp unit while making sure
that the direction is correct, and then use a
Phillips screwdriver to securely tighten the
5)
ment) and then use a Phillips screwdriver
screws).
A
-
Lamp cover
lamp unit
fixing screws
-
-
Lamp cover
fixing screw
handles
Lamp unit fixing screw
E-2