1. Manuals
  2. Brands
  3. Neatech Manuals
  4. Mobility Aid
  5. LB
  6. User manual

Neatech LB User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
2020-10
USER MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Neatech LB

Summary of Contents for Neatech LB

  • Page 1 2020-10 USER MANUAL...
  • Page 3 PRODUCT LEVIA BASCULANTE – LEVIA KID – LEVIA OTHER NAMES BASCULANTE KID – LBK – LB DYNAMIC PART NUMBER / MODEL S080 CE CONFORMITY Regulation EU 2017/745 - Class I medical device - Rule I Annex VIII ISO 14971:2012 MAIN STANDARDS APPLIED...

  • Page 4: Table Of Contents

    Index PRODUCT INFORMATION ..................... 1 PREPARATION FOR FIRST USE ....................2 Checks to be made on delivery ..................2 Unpacking ........................2 ADJUSTMENTS ........................3 List of adjustments ......................3 Seat angle ........................4 Seat position ........................5 Seat height ........................6 Seat depth ........................
  • Page 5 Footrest flip-up ......................42 Use of angle adjustable legrest with spring S080-V214 ..........43 Transport and storage ....................44 MAINTENANCE ........................47 Maintenance and cleaning ................... 47 Controls to be performed on the product ..............48 Tire puncture ....................... 50 5.3.1 User information ....................
  • Page 6 Symbols in this manual WARNING This symbol means presence of danger for the user or damage for the product. Always follow instructions when this symbol is present. PINCH HAZARD This symbol means presence of pinch hazard. INFORMATION This symbol means general information intended to simplify or best explain the use of the product.
  • Page 7 TEMPERATURE The temperature of some surfaces may increase when the product is exposed to external heat sources as direct sunlight. TIPPING HAZARD Tipping hazard is strongly reduced because of the design of the product according to EN 12182. In any case, please pay special attention during the adjustments and use of the product to prevent any damage to the user or product itself.
  • Page 8 MANUFACTURER For any need not expressly explained in this manual, please contact the manufacturer. Neatech.it SRL via A. de Curtis 4/A, 80040, Cercola (NA), Italy www.neatech.it –...

  • Page 9: Product Information

    These adjustments are performed directly on the chassis so as to make semi-permanent positions. With LB is not only the postural system that adapts to the shape of the body but the frame itself can adapt to the anthropometric measurements of the user, in order to guarantee always the best positioning, while maintaining a compact size of the frame.

  • Page 10: Preparation For First Use

    2.2 Unpacking Inside the box there are: • LB wheelchair • Documents and manual The wheelchair is delivered already mounted and ready to use. Before starting to use the wheelchair please check if all described component are present. If not, please contact as soon as possible the vendor.

  • Page 11: Adjustments

    B - Assistant Footplates depth and angle B - Assistant Backrest angle B - Assistant Push handle height B - Assistant Pushbar position B - Assistant Legrest angle B - Assistant Brake adjustment B - Assistant Table 2 www.neatech.it 3/58...

  • Page 12: Seat Angle

    In any case tilt range is between 30° and 20 °. Average needed Difficulty level: time: Easy <1 min In order to tilt the wheelchair use the levers as described in section 4.5. www.neatech.it 4/58...

  • Page 13: Seat Position

    • Set the position of the seat as desired. • Repeat operations for both left and right side of the wheelchair. WARNING It is needed to set separately left and right seat position. Always set two parts of seat at the same manner. www.neatech.it 5/58...

  • Page 14: Seat Height

    Seat width from 34 cm to 48 43.0 cm 48.5 cm cm and castors Ø150 mm Seat width from 34 cm to 48 48.5 cm cm and castors Ø175 mm Average needed Difficulty level: time: Easy 10 min Allen wrench 4 mm www.neatech.it 6/58...
  • Page 15 It is needed to set separately left and right seat height. Always set two parts of seat at the same manner. WARNING This operation could affect the stability of the wheelchair. Please perform it only if you are sure of what you are doing. www.neatech.it 7/58...

  • Page 16: Seat Depth

    54 cm S080-V073 – 48 cm 54 cm 60 cm S080-V074 – 48 cm 60 cm 66 cm Table 3 WARNING It is needed to set separately left and right seat depth. Always set them at the same manner. www.neatech.it 8/58...
  • Page 17 • Set the backrest according to the desired seat depth. • Tight again the 6 screws. • Mount again the backrest. FIXED BACKREST With the fixed backrest (S080-V203, S080-V204, S080-V205, S080-V206, S080-V207) there are only 4 screws. Figure 4 www.neatech.it 9/58...

  • Page 18: Armrests Depth

    RIGHT AND LEFT SIDE It is possible to adjust separately left and right armrest. Average needed Difficulty level: time: Easy 5 min Figure 5 • Loosen the lever shown in figure and remove the armrest. www.neatech.it 10/58...
  • Page 19 Allen wrench 4 mm Figure 6 • Loosen the 2 screws shown in figure and set the depth of armrest clamp as desired. • Tighten again the 2 screws and put back the armrest. www.neatech.it 11/58...

  • Page 20: Armrests Height

    It is possible to adjust separately left and right armrest. Average needed Difficulty level: time: Easy <5 min Allen wrench 4 mm Figure 7 • Loosen the 2 screws shown in figure. • Set the armrest according to the desired height. • Tight again the 2 screws. www.neatech.it 12/58...

  • Page 21: Sidepad Depth And Height

    It is better to adjust first armrest height and then the sidepad. Average needed Difficulty level: time: Easy <5 min Allen wrench 3 mm Figure 8 • Unscrew the 2 screws shown in figure and set the position of sidepad as desired. • Screw again the 2 screws. www.neatech.it 13/58...
  • Page 22 Vertically it is possible to choose two of shown holes. Please be sure that the choosen position doesn't represent an obstacle for armrest. Figure 9 Horizontally it is possible to choose two of shown holes. Please be sure that the chosen position doesn't represent an obstacle. Figure 10 www.neatech.it 14/58...

  • Page 23: Footplates Height

    Angle adjustable with 32.5 cm spring S080-V214 35.0 cm 37.5 cm 40.0 cm RIGHT AND LEFT SIDE It is possible to adjust separately left and right legrest if you have splitted footrest. Average needed Difficulty level: time: Easy <5 min www.neatech.it 15/58...
  • Page 24 • Unscrew the screw shown in figure with the 6 mm allen wrench while holding the nut behind with the 13 mm open-end wrench. • Repeat the operation for both left and right side of the wheelchair. • Set the position of the footplate according to desired height. • Screw again the screws. www.neatech.it 16/58...

  • Page 25: Footplates Depth And Angle

    In any case it is always possible to choose between 3 different depth. RIGHT AND LEFT SIDE It is possible to adjust separately left and right legrest if you have splitted footrest. Average needed Difficulty level: time: Easy <5 min www.neatech.it 17/58...
  • Page 26 • Tighten again the screws. Depth adjustment Allen wrench 4 mm Figure 13 • Unscrew the 2 screws shown in figure. • Set the position of the footplate according to desired depth. • Screw again the 2 screws. www.neatech.it 18/58...

  • Page 27: Backrest Angle

    S080-V631 200 N 120° - 125 S080-V632 400 N WARNING It is needed to set separately left and right backrest angle. Always set two parts of backrest at the same manner. Average needed Difficulty level: time: Easy 5 min www.neatech.it 19/58...
  • Page 28 20° simply acting on the axis shown in figure. Figure 15 Angle adjustable with pistons S080-V209 - Dynamic active backrest with spring S080-V210 In order to adjust the backrest use the levers as described in section 4.5. www.neatech.it 20/58...

  • Page 29: Push Handle Height

    It is possible to adjust separately left and right push handle. Average needed Difficulty level: time: Easy 5 min Figure 16 • Loosen the lever shown in figure and set the height of push handle as desired. • Tighten again the lever. www.neatech.it 21/58...

  • Page 30: Pushbar Position

    Average needed Difficulty level: time: Easy 5 min Standard pushbar and separated push handles S080-V382 Figure 17 • Push the buttons shown in figure and set the position of pushbar as desired. www.neatech.it 22/58...

  • Page 31: Legrest Angle

    S080-V214 Angle adjustable S080-V213 - Angle adjustable with spring S080-V214 Average needed Difficulty level: time: Easy <1 min Figure 18 • Loosen the lever shown in figure. • Set legrest angle as desired. • Tighten again the lever. www.neatech.it 23/58...
  • Page 32 Figure 19 DYNAMIC FUNCTION LOCK S080-V214 If needed, in order to unlock this movement, you have to simply tighten again the lever shown in figure. Figure 20 www.neatech.it 24/58...

  • Page 33: Brake Adjustment

    Average needed Difficulty level: time: Easy 5 min Allen wrench 5 mm Figure 21 • Loosen the 2 screws shown in figure. • Set the armrest according to the desired height. • Tight again the 2 screws. www.neatech.it 25/58...

  • Page 34: Default Position

    Default position Default position means that all adjustable parts of the wheelchair are set in the most stable and safe configuration ADJUSTABLE PARTS VALUE NOTES Seat angle 0° Or mininum Backrest angle 90° Or mininum Legrest angle 75° www.neatech.it 26/58...

  • Page 35: Use Of The Product

    Do not stand on the frame of the wheelchair. Some pathologies may limit your ability to use your wheelchair safely. Be sure to consult with a doctor about your physical limitations. www.neatech.it 27/58...
  • Page 36 Don’t use the wheelchair up or down ramps that are not equipped with proper edge protection to prevent the wheelchair from falling down. Don’t use the wheelchair down or up a hazardous incline if the surface is covered with snow, ice or the surface is uneven. www.neatech.it 28/58...
  • Page 37 Always face an obstacle facing forward. To help yourself to climb an obstacle, an assistant can use the tipping lever or the antitip bar to tip the wheelchair. With antitip device, it is possible to lightly pull the tubular and rotate it. Figure 25 www.neatech.it 29/58...
  • Page 38 Figure 26 WARNING It is necessary to grab the frame with both hands in the middle part of seat extruded tubes in order to avoid that the frame can tilt. www.neatech.it 30/58...

  • Page 39: Use Of Parking Brakes

    When you operate the brakes, operate always both left and right brake. The use of the wheelchair with only one wheel locked could be dangerous Wheelchair with drum brake S080-V108 In order to operate drum brake use the levers as described in section 4.5. www.neatech.it 31/58...

  • Page 40: Use As Seat In A Motor Vehicle

    • The pelvic belt should be worn low across the front of the pelvis, so that the angle of the pelvic belt is within the preferred zone of 30° to 75° to the horizontal, similar to that shown in figure. Figure 28 www.neatech.it 32/58...
  • Page 41 For more information see section WARNING LB wheelchair has lots of configurations and accessories. The wheelchair safety when used as a seat in a motor vehicle is assured by the manufactured if the specific configuration is mentioned in the order form and if all instructions in the manual are followed.
  • Page 42 The wheelchair has been dynamically tested in a forward facing orientation with the ATD restrained by both pelvic and shoulder belts. WARNING Both pelvic and shoulder belt should be used to reduce the possibility of head and chest impacts with vehicle components. www.neatech.it 34/58...
  • Page 43 The wheelchair should be inspected by a manufacturer's representative before reuse following involvement in any type of vehicle collision. WARNING Alterations or substitutions should not be made to the wheelchair securement points or to structural and frame parts or components without consulting the wheelchair manufacturer. www.neatech.it 35/58...

  • Page 44: Four Points Tie-Down

    Use the tie down points marked with the symbol shown in figure. Hook the wheelchair in 4 points: two in the front part and two in the rear part. Figure 31 Tie down straps should form angles shown below. WARNING Always use four tie down straps. www.neatech.it 36/58...

  • Page 45: Opening And Closing Of The Frame

    When you close the chassis remember to position the belt with two clips one on the left side and the other on the right side to keep it closed. PINCH HAZARD An incorrect handgrip of the handle might cause hand injuries. www.neatech.it 37/58...

  • Page 46: Seating System

    Removable rigid plane can be used as a base for other seating systems. Removable rigid plane can be equipped with adhesive strips in order to facilitate positioning and fixing of seating system. Figure 33 WARNING It is not possible to use the removable rigid plane as a seat. www.neatech.it 38/58...

  • Page 47: Canvas

    • Act on the lever shown in figure. Repeat operation for both left and right side of the wheelchair. • Pull toward up the plane 4.4.2 Canvas Canvas can be used directly as a seat or equipped with adhesive strips in order to position and fix another seating system. www.neatech.it 39/58...

  • Page 48: Lever Operated Functions

    It is possible to lock the brake pulling the black lever up and pushing the red lever down. In order to unlock the brake slightly pull the black lever up. www.neatech.it 40/58...
  • Page 49 1 - Seat tilt - foot 2 - Drum brake 1 - Seat tilt - foot 1 - Seat tilt - lever 2 - Drum brake 4 – Dynamic active backrest 1 - Seat tilt - lever 3 - Dynamic backrest www.neatech.it 41/58...

  • Page 50: Footrest Flip-Up

    2 - Drum brake 3 - Dynamic backrest 1 - Seat tilt - lever 4 – Dynamic active backrest 4.6 Footrest flip-up In order to flip up the footrest, push it toward up as shown in figure. Figure 35 www.neatech.it 42/58...

  • Page 51: Use Of Angle Adjustable Legrest With Spring S080-V214

    It is possible to choose if leave free the dynamic movement of legrest or block it in a certain position simply acting on a lever. Figure 36 • Loosen the lever shown in figure to let the legrest free to move. • Tighten the lever shown in figure to block the legrest in a certain position. www.neatech.it 43/58...

  • Page 52: Transport And Storage

    • Remove the legrest. Repeat operations for both right and left side of the wheelchair. Remove traction wheels Figure 38 • Press the button shown in figure and pull away the wheel. • Repeat operations for both right and left side of the wheelchair. www.neatech.it 44/58...
  • Page 53 • Unscrew the 2 screws shown in figure with the 5 mm allen wrench while holding the nut behind with the 10 mm open-end wrench. • Repeat the operation for both left and right side of the wheelchair. • Low down the backrest. www.neatech.it 45/58...
  • Page 54 It is not possible to provide an universal package, so the user should provide himself for it. The used package must be water and dust resistant and strong enough to protect the wheelchair from any hurts. When inserting the wheelchair into the package protect any protruding parts with some foam or similar. www.neatech.it 46/58...

  • Page 55: Maintenance

    To clean the wheelchair do not use high-pressure water spray devices. For plastic and metal parts use a soft cloth dampened with mild detergent. For the upholstery, linings, seat and back covers use warm water and mild detergent. Do not use stain removers, solvents, acids, etc. www.neatech.it 47/58...

  • Page 56: Controls To Be Performed On The Product

    6. If wheels are pneumatic, check Monthly B - Assistant tire usury Make sure that the brakes are Monthly B - Assistant working correctly. See section 4.1. www.neatech.it 48/58...
  • Page 57 B - Assistant oil leaks Figure 43 Figure 44 WARNING In any moment, if you see any deformations of the chassis, please contact immediately an authorized service center to check the correct tightening of all the screws of the frame. www.neatech.it 49/58...

  • Page 58: Tire Puncture

    This section refers only to wheelchair with pneumatic wheels. 5.3.1 User information Traction wheels Figure 45 • Press the button shown in figure and pull away the wheel. Press the button shown in figure and pull away the wheel. www.neatech.it 50/58...

  • Page 59: Service Information

    The product is suitable for reuse. Before dispensing it, the product must be cleaned, and subjected to maintenance. The operating instructions are included in this manual and must also be provided when the product is passed on. WARNING This operation must be performed only at an authorized service center. www.neatech.it 51/58...

  • Page 60: Specifications

    EN 12183 : 2014 ISO 7176-8 Intended use The LB wheelchair is intended to be used by those groups of users with temporary or permanent mobility difficulties confined to a sitting position who need to move in mostly internal environments.

  • Page 61: Maximum User Weight

    Seat width 26 cm 50 kg 28 cm 50 kg 30 cm 50 kg 34 cm 75 kg 38 cm 100 kg 42 cm 150 kg 44 cm 150 kg 46 cm 150 kg 48 cm 150 kg www.neatech.it 53/58...

  • Page 62: Dimensions

    26 cm 28 cm 30 cm 34 cm 38 cm 42 cm 44 cm 46 cm 48 cm see section 6.2.1 see section 6.2.2 see section 3.7 see section see section 6.2.3 see section N. D. see section 3.4 www.neatech.it 54/58...

  • Page 63: Wheels Width

    42 cm 57.5 cm 63.5 cm [T14 0] [T34 0] 44 cm 59.5 cm 65.5 cm [T15 0] [T35 0] 46 cm 61.5 cm 67.5 cm [T16 0] [T36 0] 48 cm 63.5 cm 69.5 cm [T37 0] www.neatech.it 55/58...

  • Page 64: Armrest Width

    Seat width 26 cm 37.0 cm 28 cm 39.0 cm 30 cm 41.0 cm 34 cm 45.0 cm 38 cm 49.0 cm 42 cm 53.0 cm 44 cm 55.0 cm 46 cm 57.0 cm 48 cm 59.0 cm www.neatech.it 56/58...

  • Page 65: Length

    81.5 cm 76.0 cm [F6673] [F5598] Ø22” – Ø175 mm 82.0 cm 83.0 cm Ø24” – Ø125 mm 74.0 cm 76.0 cm Ø24” – Ø150 mm 74.0 cm 76.0 cm Ø24” – Ø175 mm 77.0 cm 85.0 cm www.neatech.it 57/58...

  • Page 66: Warranty Terms

    Definitions MANUFACTURER: Manufacturer means the legal person who manufactures a product. For the scope of the following document, the manufacturer is: Neatech.it s.r.l. via Antonio de Curtis 4/A – 80040 – Cercola (NA) Tel. +39 081 555 1946 – info@neatech.it –...
  • Page 67 Note...

Table of Contents