Haier HWS33GG User Manual page 26

Troubleshooting
Problem
Frost on back of
inner gallbladder?
Too much noise?
owing in the cabi-
net?
The wine cabinet
is not working?
Why are there sli-
ght ridges on both
sides of the case?
Door body not cl-
osed tightly, air le-
akage?
Compressor kee-
ps running for a
long time?
Possible Cause
Refrigeration pipes are designed
on the back of the inner liner of a
wine cabinet.
Unstable Placement.
culating pipeline of refrigeration
system.
Connection between wine ca-
binet plug and power outlet.
Protective mode of compressor.
The phenomenon of expansion
and contraction caused by heat.
After using the product for a per-
iod of time, it is easy to make the
door seal hard and distorted be-
cause of the lower temperature
in the cabinet.
Whether the door of the cabinet
is not closed or opened too ma-
ny times?
Put too many drinks one time.
Whether the cabinet is setting
too low?
Possible Solution
This is a normal phenomenon.
The cabinet will automatically
use.
Adjust the adjustable bottom
foot to keep the cabinet stable.
Make sure the cabinet does not
touch other objects or walls.
This is a normal phenomenon.
Make sure that the wine cabinet
plug is properly connected to
the power outlet;The power so-
cket is live;Good fuse at home.
The compressor has a protec-
tive mode with an interval of 7
minutes.
This is a normal phenomnon.The
purpose is to ensure good heat
iciency of the wine cabinet.
Bake the deformed area with hot
air from a hairdryer or cover the
deformed area with a hot towel.
Close the door tightly when the
door seal is soft.
Close the door tightly or reduce
the number of times you open it.
Do not put too many drinks one
time, and leave a gap between
drinks.
The cabinet setting can be adju-
sted appropriately.
EN