Panasonic TX-22LX2 Service Manual page 8

9.1.1 RF video
TOP PREVIOUS NEXT
1. Receive full color bar by RF signal input.
(Aspect mode : wide, Viewing mode: standard, LCD AI: OFF)
2. Go to "Auto Y Gain" under Service 1 and make automatic adjustment of video signal level by
the blue key.
When Service 1 appears, presetting takes place automatically as shown below.
¡
Sharpness: 0
¡
AI: OFF
¡
3D-Comb filter: On
¡
3. Press STR key to write the value of adjustment results to EEPROM.
4. Check that the automatic adjustment of video signal level has completed normally.
When the adjustment is completed normally, the "Auto Y Gain" color turns black.
¡
Note:
In the adjustment mode, the M2 MCU changes automatically to the mode shown in the left.
TOP PREVIOUS NEXT
All manuals and user guides at all-guides.com
Instrument Name
Remote controller
Internal signal (studio color bar)
http://servis-manual.com/
Connect to Remarks
RF input