Fleximounts WR16 Installation Manual

68kg
per shelf
Package Includes:
Fixings Package B
Tools Required for Assembly:
Pencil Power Drill
Tape Measure Stud Finder
25x75mm
Hammer Masonry Drill Bit Wood Drill Bit
Ladder Eye Protection Shifter Or Socket Wrench
Install Shelf Brackets into Solid Concrete or Masonry Walls
1. Determine the desired height, use template to level and then
transfer the template hole guides onto wall.
2. Drill 60mm deep holes with a 10mm masonry drill bit.
3. Hammer in the expansion anchors (B2) firstly and then install the
shelf brackets with washers (B3) and coach screws (B1) with shifter
or socket wrench.
Solid Concrete or Masonry Wall
Install Shelf Brackets into Timber Wall Studs
1.Determine the desired height, use a stud finder to ascertain stud centres
( installation template provided suits the two common stud centres being 450mm
& 600mm. If for the unusual reason that stud centres are different to template
centres, ensure all support brackets provided are installed onto timber wall studs )
2.Drill 60mm deep holes once template has been levelled and into position, using
a 5mm wood drill bit and the holes provided on template.
3.Install the shelf brackets with washers ( B3 ) and Coach Screws ( B1 ) with a shifter or socket wrench.
4.Do not install under any circumstances onto metal stud wall frames.
Timber Wall Stud
fixed onto the
60mm
5mm
B3 B1