Advertisement
Assembly instructions for grill motor and accessories
Warning!
Remove the hot grate before using the burner.
Assembly time estimated: 10 min
1.
Attach the motor support to the side of the combustion zone of the grill (Fig. 1).
2. Slide the grill motor into the support (Fig. 2).
3. Attach the meat fork and locking collar as shown (Fig. 3). Modify the position of the locking
collar before preparing anything on the skewer.
4. Assembly completed (Fig. 4).
Figure 1
Figure 3
Operation
Note!
Respect the manual of the manufacturer of your grill, too.
Your grill might be equipped with a burner for grill skewers. The following instructions contain information
on how to use grill with and without grill skewer burners. Make sure to obey the instructions that match
your grill.
When the grill skewer motor has been attached and plugged in, it is operational. After attaching the
handle of the spit rod, slide one meat fork onto the rod (with the tines directed towards the meat). Arrange
the food to be grilled on the rod and firmly push the forks together. Tighten all screws. You might need
to wrap the food to be grilled with butcher's string (never use nylon or plastic strings) to secure loose
parts.
Once the food is secured, insert the pointed end of the rod into the motor assembly and rest the other
end on the support on the right-hand side of the grill. (If necessary, remove the cooking grates to have
more space.) Set the switch to the "on" position to operate the motor.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Figure 2: Sliding the motor into its support.
Figure 4: Assembly completed.
Item 62061–62065
Page 7
12 2021-1
Advertisement
