Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Excelitas Technologies Kepri 010-00490R
- Page 1 Kepri™ UV LED Upper-Air System Applicable for the following part number: Name/Type Model/Part Numbers Kepri Upper-Air System 010-00490R Installation/Reference Guide Excelitas Canada Inc. 2260 Argentia Road Mississauga (ON) L5N 6H7 Canada +1 905.821.2600 www.excelitas.com 035-00725R Rev 2...
- Page 2 Kepri™ UV LED Upper-Air System Installation/Reference Guide 035-00725R Excelitas Canada Inc. 2022 All rights reserved No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language in and form by any means without the prior written consent of Excelitas Canada Inc.
-
Page 3: Table Of Contents
Kepri™ UV LED Upper-Air System Table of Contents Introduction ..........................1 Safety Precautions/User Warnings ..................2 2.1 Glossary of Symbols ........................2 2.2 Safety Precautions ......................... 2 Getting Started ........................4 3.1 System Components ........................4 3.2 Kepri Diagrams ..........................4 Installation .......................... - Page 4 Kepri™ UV LED Upper-Air System Figures Figure 1 Front View ............................4 Figure 2 Kepri Indicators ..........................4 Figure 3 Back View ............................5 Figure 4 Side View ............................5 Figure 5 Bottom View ............................. 6 Figure 6 Mounting Bracket ..........................6 Figure 7 Mounting Bracket with Wall Mounting Holes Highlighted ..............
-
Page 5: Introduction
Kepri™ UV LED Upper-Air System Introduction Excelitas Kepri™ incorporates the most advanced UVC LED Upper Air technology, along with abundant safety features, to create a dependable, user-friendly wall-mounted guardian against airborne pathogens (including SARS-CoV-2, the virus that causes Covid-19). Kepri’s sleek design and minimized profile allow for unobtrusive implementation in classrooms, hospital rooms, office suites and dental offices. -
Page 6: Safety Precautions/User Warnings
Kepri™ UV LED Upper-Air System Safety Precautions/User Warnings 2.1 Glossary of Symbols CAUTION – Risk of danger: consult accompanying documents. WARNING – Eye damage may result from directly viewing ultraviolet light. Protective eye shielding and clothing must be used at all times. WARNING –... - Page 7 Kepri™ UV LED Upper-Air System Do not use this equipment for other than intended use. 10. Always use this product with the supplied power cord. 11. It is recommended that ONLY QUALIFIED TECHNICAL PERSONNEL perform any array changes or maintenance. If servicing the unit, turn the device off and disconnect the power source before opening the cover of this unit.
-
Page 8: Getting Started
Kepri™ UV LED Upper-Air System Getting Started 3.1 System Components This upper-air system contains the following components: • Kepri upper-air unit • Kepri wall mount bracket • Power cord Carefully unpack the unit and store the packing material for future use. If any components are missing or appear damaged, please contact the company you purchased the unit from or Excelitas directly. -
Page 9: Figure 3 Back View
Kepri™ UV LED Upper-Air System On/Off switch AC power receptacle Figure 3 Back View Array (LED) replacement door Figure 4 Side View http://www.excelitas.com Excelitas Canada Inc. 2022 All rights reserved 035-xxxxxR, rev.1 035-00725R... -
Page 10: Figure 5 Bottom View
Kepri™ UV LED Upper-Air System Emission Selector Switch (see descriptions below) Figure 5 Bottom View Icon Description Always On – The device will continuously emit UV energy On when Unoccupied – The device will only emit UV energy if no motion is detected On when Occupied –... -
Page 11: Installation
Kepri™ UV LED Upper-Air System Installation 4.1 Site Inspection Before you install the device, verify the following: • The potential installation location has a minimum ceiling height of 2.7m (9ft). • The potential installation location has a nearby installed AC power receptacle easily reachable with the Excelitas-supplied detachable AC power cord. -
Page 12: Pendant Bracket Installation
Kepri™ UV LED Upper-Air System 4.3 Pendant Bracket Installation Select two clamping bolts based on the size and shape of the pendant. Position the bottom of the mounting bracket at least 2 3m (90.5”) from the floor. Refer to Figure Secure the clamping bolts to a pair of slots on the mounting bracket. -
Page 13: Securing Kepri To The Mounting Bracket
Kepri™ UV LED Upper-Air System 4.4 Securing Kepri to the Mounting Bracket Slide the Kepri module into the wall bracket and use the guide pins to engage the corresponding holes. Refer to Figure Guide Pin Guide Pin Side Screw Side Screw Hole Hole Figure 10 Kepri Module Engaging the Wall Bracket... -
Page 14: Operation
Kepri™ UV LED Upper-Air System Operation 5.1 Powering Up Section 4, “Installation”. Ensure that the Kepri module is securely mounted as described in Verify that the power supply is connected to a properly grounded AC outlet. Insert the supplied detachable AC power cord into power receptacle in the rear. Refer to Figure 3. Turn the power switch ON. -
Page 15: Figure 12 Sensor Detection Areas
Kepri™ UV LED Upper-Air System If the switch is set to one of the other two settings, Kepri relies on the motion sensor to determine when UV Emissions starts and stops: Expect a 15 second delay when the unit will power on or off with the motion sensor. - Page 16 Kepri™ UV LED Upper-Air System This feature is not designed to eliminate the exposure risk from entering the UV emission area. Before entering the UV emission area, always turn Kepri OFF. http://www.excelitas.com Excelitas Canada Inc. 2022 All rights reserved 035-xxxxxR, rev.1 035-00725R...
-
Page 17: Troubleshooting
Kepri™ UV LED Upper-Air System Troubleshooting If problems persist beyond these troubleshooting points, please contact Excelitas Technologies Section 10, “Contact Service Department (refer to Information”). 6.1 Failure to Power Up If the Kepri unit fails to power up or function properly, use the following checklist to eliminate the most common causes of problems. -
Page 18: Care And Maintenance
Note Regardless of the color, the device will continue to emit UV energy. Replacing the LED Array When the Lifetime indicator turns amber or red, it is time to replace the LED array. Replace the LED module with the following Excelitas Technologies part numbers: Part Number Description... -
Page 19: Figure 14 Led Replacement Door Removed
Kepri™ UV LED Upper-Air System LED Array Replacement Door Figure 14 LED Replacement Door Removed With your fingers, remove the LED array. Refer to Figure 15. LED Array Figure 15 LED Array Partially Removed Insert the replacement array into the device, so the area with the contact pads enters the device first. -
Page 20: Cleaning
Kepri™ UV LED Upper-Air System Contact Pads Figure 16 LED Replacement Array with Contact Pads Highlighted Attach the LED replacement door to the Kepri module. Tighten the screw attached to the door. Plug the power cord into the receptacle. Turn the device ON. See sections 4.4 for further details. - Page 21 Kepri™ UV LED Upper-Air System Let solvent evaporate and verify that the optical surface is clean. Repeat cleaning steps as necessary. Before reinstalling and/or using the optics, allow them to dry completely. CAUTION: Before using any solvent, consult the manufacturer’s Material Safety Data Sheet (MSDS) and your internal Health and Safety Advisor for proper handling, storage, and disposal instructions.
-
Page 22: Technical Specifications
50° x 4° view 4m (157”) Motion sensor range Motion sensor field of view 110° Note IES file are located on the Excelitas Technologies website. Table 7 Electro-Optical Specifications 8.4 Environmental – Operating Conditions Parameter Value Ambient Temperature 10° to 30° C (50° to 86° F) -
Page 23: Environmental - Transport And Storage Conditions
Kepri™ UV LED Upper-Air System 8.5 Environmental – Transport and Storage Conditions Parameter Value Temperature -35° to 60° C (-35° to 140° F) Relative Humidity 10 to 95% RH (non-condensing) Atmospheric Pressure 500 to 1060 hPa Table 9 Environmental – Transport and Storage Conditions 8.6 Mechanical Specifications Figure 17 Mechanical Specifications - Kepri http://www.excelitas.com... -
Page 24: Room Dosing
Kepri™ UV LED Upper-Air System Figure 18 Mechanical Specifications – Mounting Bracket 8.7 Room Dosing The historic UVGI dosing criteria of 12mW/m is primarily based on disinfection tests for Tuberculosis. Given the recent COVID-19 pandemic, Kepri was tested against a virus, Coliphage φX174, to correlate better its disinfection capability to SARS-CoV-2, the virus that causes COVID-19. -
Page 25: Regulatory Compliance
Kepri™ UV LED Upper-Air System • For more information refer to the CDC guidelines for Environmental Infection Control in Health- Care Facilities (2003) and the CDC Upper-Room Ultraviolet Germicidal Irradiation (UVGI) web page. 8.8 Regulatory Compliance Product Safety and Electromagnetic Compatibility: The Kepri has been tested and found to comply with product safety and electromagnetic compatibility requirements. - Page 26 Kepri™ UV LED Upper-Air System The equipment that you bought has required the extraction and use of natural resources for its production. It may contain hazardous substances that could impact health and the environment. In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems.
-
Page 27: Warranty
UV LED Upper-Air System Warranty Excelitas Technologies warrants the original purchaser for a period of one (1) full year, calculated from the date of purchase, that the equipment sold is free from defects in material and workmanship. In the event of a claim under this warranty, the equipment is to be sent postage and carriage paid to Excelitas Technologies Service Centre. -
Page 28: Contact Information
Kepri™ UV LED Upper-Air System 10 Contact Information Excelitas Canada Inc. Tel: +1 905 821-2600 Fax: +1 905 821-2055 Toll Free: +1 800 668-8752 (USA and Canada) https://www.excelitas.com/product/kepri-upper-air-uvc-disinfection-system https://www.excelitas.com/contact?area=uvc-disinfection-light-sources Technical support and service (905) 821-2600, option 3 1-800-668-8752, option 3 (USA and Canada) Replacement parts and accessories Replacement parts and accessories can be purchased directly from Excelitas.
Need help?
Do you have a question about the Kepri 010-00490R and is the answer not in the manual?
Questions and answers