Specifying The File Name Serial Number Generation Rule; Creating An Image Storage Folder - Casio Exilim EX-Z2300 User Manual

Specifying the File Name Serial Number Generation Rule

(File No.)
Procedure
[MENU] * Set Up Tab * File No.
Use the following procedure to specify the rule that governs generation of the serial
number used in file names (page 133).
Tells the camera to remember the last used file number. A new file will
be named using the next sequential number, even if files are deleted or
if a blank memory card is loaded. If a memory card is loaded and that
Continue card already has files stored on it and the largest sequential number in
the existing file names is greater than the largest sequential number
remembered by the camera, numbering of new files will start from the
largest sequential number in the existing file names plus 1.
Restarts the serial number from 0001 whenever all files are deleted or
when the memory card is replaced with a blank one. If a memory card
Reset is loaded and that card already has files stored on it, numbering of new
files will start from the largest sequential number in the existing file
names number plus 1.
Creating an Image Storage Folder (Create Folder)
Procedure
[MENU] * Set Up Tab * Create Folder
Create Folder
Cancel
• Images recorded with the BEST SHOT "For eBay" or "Auction" scene, and the "For
YouTube" scene are stored in special folders. They are not stored in the folder you
create here.
• Deleting all of the files in a folder cause the folder to be deleted as well.
B
Creates a folder with a unique number (page 133). Files will be
stored in the new folder starting from when you record your
next image.
Cancels folder creation.
138
Other Settings (Set Up)