Advertisement
Available languages
Available languages
UPVEL UP-105GI Gigabit PoE injector
Getting started
1. Fix the PoE injector on some flat surface if necessary.
2. Connect the injector to your local network using the LAN port.
3. Connect your PoE device (or non-PoE device combined with PoE splitter) to PoE port.
4. Connect the power cable to the injector and plug it into a socket.
5. Make sure the connection is established. The Power LED should be active when the connected device is on. The Active
LED should be active when data is being transmitted.
Package contents
•
PoE injector
•
Power cable
•
Quick Installation Guide
Specifications
Standards
Data Rate
Input Power
Оutput Voltage
Оutput Current
Output Power
PoE Mode
Weight
Dimensions
Environment
Safety Approvals
For any unforeseen installation issues or questions about the
UP-105GI Gigabit PoE Injector, please contact our Technical Support:
support@upvel.com
Toll Free Support Hotline:
•
USA/Canada: 855-IT-UPVEL (855 488-7835)
(M-F 10AM-7PM PST excl. public holidays)
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX ,
IEEE 802.3ab 1000Base-T, IEEE 802.3at
10/100/1000 Mbps
100 V ~240 V AC, 0.75 A 47 ~63 Hz
53 ±2 V
from 600 mA
31.8 W
B (+ 4, 5; - 7, 8)
6.6oz (187g)
Operating Temperature: -10 ~ 40 ℃ (14 ~ 104 °F)
5.4x2.5x1.3in (137x62x32mm)
Storage Temperature: -10 ~ 60 ℃ (14 ~ 140 °F)
Storage humidity: 5 ~ 95% non-condensing
CE,FCC,EAC
QUICK INSTALLATION GUIDE
Irvindale, CA USA
UPVEL is registered Trademark
Designed in USA / Made in China
UPVEL
Advertisement
