Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Zeizz Stemi 508
Summary of Contents for Zeizz Stemi 508
- Page 1 SDA Stand for Stereomicroscopes Operating Manual...
-
Page 3: Copyright
COPYRIGHT SDA Stand for Stereomicroscopes Carl Zeiss Knowledge of this manual is required for the operation of the instrument. Would you therefore please make yourself familiar with the contents of this manual and pay special attention to hints concerning safe operation of the instrument. -
Page 4: Table Of Contents
CONTENTS Carl Zeiss SDA Stand for Stereomicroscopes CONTENTS Page Copyright ............................. 3 Contents ............................. 4 Illustrations ............................. 4 Introduction ..........................5 General ............................. 5 Notes on instrument safety......................6 Notes on warranty........................6 Description..........................7 System overview........................7 Technical data ........................... 8 Unpacking and Installation.................... -
Page 5: Introduction
INTRODUCTION SDA Stand for Stereomicroscopes Carl Zeiss INTRODUCTION General This operating manual includes information and warnings that must be observed by the user. The following warning and information symbols are used in this manual: CAUTION This symbol indicates a possible hazard to the user of the instrument. CAUTION This symbol indicates a possible hazard to the instrument or system. -
Page 6: Notes On Instrument Safety
INTRODUCTION Carl Zeiss SDA Stand for Stereomicroscopes Notes on instrument safety The SDA Stand for Stereomicroscopes, including original accessories, must not be used for applications other than those described in this manual. The manufacturer cannot assume any liability for other applications, including those of individual modules or single components. This also applies to any service or repair work that is not carried out by authorized service personnel. -
Page 7: Description
DESCRIPTION SDA Stand for Stereomicroscopes Carl Zeiss DESCRIPTION System overview B 46-0075 e 05/06... -
Page 8: Technical Data
DESCRIPTION Carl Zeiss SDA Stand for Stereomicroscopes Technical data Weight and dimensions: SDA stand, complete equipment ..................approx. 53 kg Consisting of: - Base plate SDA (350 mm x 350 mm x 50 mm) ............approx. 30 kg - Double boom SDA (670 mm x 200 mm x 170 mm) ..........approx. 15 kg Additional items: - Column SDA (∅... -
Page 9: Unpacking And Installation
UNPACKING AND INSTALLATION SDA Stand for Stereomicroscopes Carl Zeiss UNPACKING AND INSTALLATION Unpacking and installing the SDA stand The two standard basic components of the SDA stand are supplied packed in two packages. The SDA base plate is separately packed. package containing double... -
Page 10: Fig. 3-2 Installing The Double Boom
UNPACKING AND INSTALLATION Carl Zeiss SDA Stand for Stereomicroscopes • Slip vertical adjustment retainer ring (3-2/4) over column (3-2/5) and clamp it tightly at the desired height using clamp lever (3-2/3). The angular position of the clamp lever can be set to a position that is favorable for the clamping procedure. -
Page 11: Installing Stemi Mount And Microscope Body
UNPACKING AND INSTALLATION SDA Stand for Stereomicroscopes Carl Zeiss Installing Stemi mount microscope body • Loosen clamp lever (3-3/2) on rotating/tilting head (3-3/1). • Align column 32 (3-3/3) vertically and retighten the clamp lever. The angular position of the clamp lever on the rotating/tilting head may be varied analogously to the clamp lever of the retainer ring. -
Page 12: Operation
OPERATION Carl Zeiss SDA Stand for Stereomicroscopes OPERATION The SDA stand allows the working position of the used microscope body to be adapted to large-size or voluminous objects to be examined. The following adjustments are possible: − Vertical adjustment of the double boom on the stand column (approx. 425 mm), see Section 4.1 −... -
Page 13: Longitudinal Adjustment Of The Double Boom
OPERATION SDA Stand for Stereomicroscopes Carl Zeiss • Retighten clamp lever (4-1/3). • Holding double boom (4-1/8) tight loosen clamp screw (4-1/1). • Slowly lower the double boom (4-1/8) until it rests on the retainer ring. • Retighten clamp screw (4-1/1). Fig. -
Page 14: Boom Rotation About The Stand Column
OPERATION Carl Zeiss SDA Stand for Stereomicroscopes Boom rotation about the stand column CAUTION The retainer ring (4-1/4) must always be clamped directly under the double boom (4-1/8)! The clamps of retainer ring (4-1/3) and double boom (4-1/1) may only be released in turn; otherwise, the double boom will slip down unsecured involving the risk of injury to the operator or damage to the microscope and the object to be examined. -
Page 15: Inclination Of Column 32 In The Rotating/Tilting Head
OPERATION SDA Stand for Stereomicroscopes Carl Zeiss Inclination of column 32 in the rotating/tilting head CAUTION Before inclining the column 32, check how far it can be inclined without the microscope colliding with the double boom, the object to be examined or the mounting surface or base plate. - Page 16 Microscopy from Carl Zeiss We make it visible For further details, please contact: Carl Zeiss MicroImaging GmbH P.O.B. 4041, 37030 Göttingen, Germany Phone: +49 (0) 551 5060 660 Fax: +49 (0) 551 5060 464 E-Mail: micro@zeiss.de www.zeiss.de Specifications are subject to change. B 46-0075 e 05/06...
Need help?
Do you have a question about the Stemi 508 and is the answer not in the manual?
Questions and answers