Advertisement
Step 6
: Remote Control
Remote Control Buttons and Functions
✎
This is a special remote control for the visually impaired and has Braille points on the Power, Channel and Volume buttons.
Turns the TV on and off.
Displays and selects the available video sources.
Press to directly access channels.
Press to select additional channels (digital) being
broadcasted by the same station. For example, to select
channel "54-3", press "54", then press "–" and "3".
Adjusts the volume.
Brings up the OSD.
Displays the Content View, which includes Channel
List, Internet@TV, Media Play, and AllShare.
Quickly select frequently used functions.
Returns to the previous menu.
These buttons are for the Channel list, Internet@TV,
Media Play menu, etc.
Use these buttons in Media Play and Anynet+ (HDMI-
POWER
CEC) modes. (�: Controls recording for Samsung
recorders that have the Anynet+ feature)
Changing Channels and Adjusting the Volume
Adjust the volume by pressing the Volume button
on the remote.
✎
CONTENT
You can also change the channels by pressing the z button on the front panel of your TV and adjust the volume by pressing the y button.
TOOLS
Selecting a Source
RETURN
To watch a movie on your Blu-ray player or watch
A
your favorite TV show, you must select the correct
POWER
source. A source is a device, such as a Blu-ray/DVD
MEDIA.P
player, a cable/satellite box, antenna or a cable TV
FAV.CH
input. Sources can be connected to your TV through
the HDMI, DVI, Component, Composite, or D-sub
connections, or through the Antenna or Cable In connections.
To view the signal from a source connected to the HDMI, DVI, Component,
Composite, or D-sub jack, press the
SOURCE
button on your remote. Each time
you press the
SOURCE
button, you change to a different source.
CONTENT
TOOLS
RETURN
A
POWER
ON/OFF
Turns the remote control light on or off. When on, the
SOURCE
buttons become illuminated for a moment when pressed.
(Using the remote control with this button set to ON will
reduce the battery usage time.)
Returns to the previous channel.
PRE-CH
Cuts off the sound temporarily.
MUTE
Changes channels.
CH LIST
Displays the channel list on the screen.
MENU
@TV
Link to various internet services.
INTERNET
CONTENT
TOOLS
INFO
Displays information on the TV screen.
Selects the on-screen menu items and changes the values
seen on the menu.
RETURN
EXIT
Exits the menu.
A
B
C
D
MEDIA.P: Displays Media Play.
MEDIA.P
YAHOO!
MTS
YAHOO!: Runs Yahoo widget.
FAV.CH
P.SIZE
MTS: Press to choose stereo, mono or Separate Audio
CC
Program (SAP broadcast).
ON/OFF
FAV.CH: Displays Favorite Channel Lists on the screen.
P.SIZE: Selects the picture size.
SOURCE
CC: Controls the caption decoder.
PRE-CH
MUTE
Change the channels by pressing the Channel button on the remote.
✎
If your TV is attached to a cable or satellite box, change the channel using
CH LIST
the box's remote.
MENU
@TV
INTERNET
INFO
Viewing the On Screen Menus
EXIT
To view the On Screen Menus, follow these steps:
B
C
D
ON/OFF
1. With the power on, press the
MENU
button on
your remote. The main menu appears.
MTS
SOURCE
The menu's left side has the following menu
P.SIZE
CC
options: Picture, Sound, Channel, Setup,
Input, Application and Support.
2. Press the ▲ or ▼ button on your remote to select a menu option, and then
press the ENTERE button.
3. When done using the menu, press the
EXIT
PRE-CH
MUTE
CH LIST
MENU
@TV
INTERNET
INFO
EXIT
B
C
D
Step 7
: The Internet@TV and Media Play Features
Your TV's Internet@TV feature lets you connect to an ever-expanding portal of your
favorite on-line digital content. Customizable widgets give you access to Blockbuster,
Facebook, YouTube, Flickr, Netflix* and more - all on your HDTV. The Media Play
feature lets you connect to your PC through your home network and stream PC audio
and video files to your HDTV using your remote. To use IPTV or Samsung PC Share
Manager, you must connect your TV to your network. You can attach the TV to your
network in two ways, by cable, using CAT 5 cable, or wirelessly, using a Samsung
Wireless LAN Adapter. Instructions for both connection methods are below.
Network Connection - Wired
There are two main ways to connect your TV to your network using cable,
depending on your network setup. They are illustrated below:
The Modem Port on the Wall
Modem Cable (Not Supplied)
The LAN Port on the Wall
Configuring the Network Connection - Wired
Most home networks use the Dynamic Host Configuration Protocol (DHCP) to
configure network connections. Home networks that support DHCP automatically
provide the IP address, subnet mask, gateway, and DNS values your TV needs to
access the Internet so you don't have to enter them manually.
To configure your network connection for a network that uses DHCP, follow these
steps:
1. Connect your TV to your network as shown in one of the illustrations above.
2. Turn on your TV, press the
Setup → Network.
3. Set the Network Type to Wired if it is not already set to Wired.
4. Select Network Setup. The Network Setup screen appears.
5. On the Network Setup menu,
set Internet Protocol Setup and
DNS to Auto. Auto acquires and
POWER
ON/OFF
enters the necessary internet values
automatically.
SOURCE
6. Select Network Test to check
Internet connectivity.
✎
Some networks are Static IP
networks. If your network is
a Static IP network, you can
not use DHCP to configure the
network connection. Instead, you must enter the IP Address, Subnet Mask,
PRE-CH
Gateway, and DNS Server manually. For instructions explaining how to
MUTE
configure a Static IP network, see your user's manual.
Starting Internet@TV
CH LIST
MENU
@TV
To view the On Screen
INTERNET
CONTENT
Menus, follow these steps:
TOOLS
INFO
1. Turn on your TV, press
the
MENU
button
on your remote, then
RETURN
EXIT
select Application →
Content View.
button on your remote to exit.
A
B
C
D
2. Press the ◄ or ►
MEDIA.P
MTS
button to select
Internet@TV, then
FAV.CH
P.SIZE
CC
press the ENTERE
button. The USER TERMS and PRIVACY POLICY windows appears, then
select Yes.
3. Follow the directions on your screen to set up Internet@TV. For detailed
instructions, see your Owner's Manual.
✎
For best Internet@TV results, your broadband company should provide
sustained download speeds of 3.5 mb/sec or more.
Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or
modem. To connect wirelessly, you must first attach a "Samsung Wireless LAN
Adapter" (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the
USB 1 (HDD)
The LAN Port on the Wall
TV Rear Panel
External Modem
Samsung's Wireless LAN adapter is sold separately and is offered by select
(ADSL / VDSL / Cable TV)
retailers, Ecommerce sites and Samsungparts.com. Samsung's Wireless LAN
adapter supports the IEEE 802.11A/B/G and N communication protocols.
Samsung recommends using IEEE 802.11N. When you play the video over a IEEE
LAN Cable (Not Supplied)
802.11B/G connection, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices
TV Rear Panel
that access the network through an access point or AP (typically a wireless IP
Sharer) to transmit an encrypted security code called an access key.
If Pure High-throughput (Greenfield) 802.11N mode is selected and the Encryption
type is set to WEP, TKIP or TKIPAES (WPS2Mixed) for your AP, Samsung TVs will
LAN Cable (Not Supplied)
not support a connection in compliance with new Wi-Fi certification specifications.
Configuring the Network Connection - Wireless
The instructions below are for networks that use the Dynamic Host Configuration
Protocol (DHCP) to configure network connections automatically. If your have a
Static IP network, see your user's manual for configuration instructions.
To configure your network connection for a network that uses DHCP, follow these
steps:
1. Connect your TV to your network as shown in the illustrations above.
2. Turn on your TV, press the
→ Network.
MENU
button on your remote, and then select
3. Set the Network Type to Wireless if it is not already set to Wireless.
4. Select Network Setup. The Network Setup screen appears.
5. On the Network Setup menu,
select an AP (Access Point) or ad
hoc network. If you have selected
Network Setup
a network with a security key, the
:
Internet Protocol Setup
Auto
r
Security Key screen appears.
:
IP Address
6. Enter the security key using the
:
Subnet Mask
numbers on the remote, and then
Gateway
:
press the Blue button on your
DNS
:
Auto
remote.
DNS Server
:
✎
If your network uses WEP
security encryption, 0~9 and
U Move E Enter R Return
A~F will be available on the Security Key screen. Use the Direction
button on your remote to move to the characters and the enter key to
select them.
7. On the Network Setup menu, set Internet Protocol Setup and DNS to Auto.
Auto acquires and enters the necessary internet values automatically.
8. Select Network Test to check internet connectivity.
✎
For more information, see your user's manual.
Recommended
Connecting a USB Device for Media Play
My Applications
by Date 1/1
You can enjoy photo, music,
and movie files stored on a
USB device by connecting
it to the TV and using
the Media Play feature.
Samsung Apps
Settings
For Media Play operating
Login
Mark as Favorite
Sort by
R Return
instructions, please see your
Owner's Manual.
or
USB 2
port on the back of your TV. See the illustration below.
Samsung Wireless LAN
TV Rear Panel
Adapter
Wireless IP sharer
or
LAN Cable (Not Supplied)
MENU
button on your remote, and the select Setup
Network Setup
:
Select a Network
Not Selected
r
Internet Protocol Setup
:
Auto
IP Address
:
:
Subnet Mask
Gateway
:
DNS
:
Auto
DNS Server
:
PBC(WPS) U Move E Enter R Return
MediaPlay
Videos
SUM
Change Device
View Devices E Enter R Return
BN68-02714A-02
Advertisement
