Heater Sensor Connection - Baxi COMBI 80 Manual

5. HEATER SENSOR CONNECTION

To carry out this operation, proceed as described here:
• Remove the front panel boiler;
• Turn the control box downwards and get to the board by taking off the protective cover;
• Insert the cable guide-clamp into the boiler crosspiece;
• Connect the NTC priority sensor on the Combi unit to the boiler connector CB9 (follow the instructions given in the
boiler manual).
Figure 3: Domestic hot water priority sensor connection
7804282.02 - en
SUPPLEMENTARY INSTRUCTIONS
23
FOR THE INSTALLER