Table of Contents
Advertisement
Make sure the foundation is flat and level prior to placement. Units using liquid propane will come with
a burner, orifice, flex hose and regulator that will attach to the propane tank. This gas hose will need to
go from the tank to the burner. The hose should connect from the key valve within the unit, through a
vent underneath and to the propane tank. Make sure all fittings are tightened properly with a wrench,
do not hand tighten! An additional flex hose will be attached to the other end of the key valve to the
flare fitting at the bottom of the burner. The arrow on the key valve should be pointing the direction of
the gas flow (towards the burner plate on your fire feature).
Fire features do not include propane cylinder; you will need to provide one. The liquid propane supply
cylinder must be constructed and marked in accordance with the specifications for propane gas
cylinders as required by the U.S. Department of Transportation (DOT).
3.2 Internal View of Components
3.2.1 Natural Gas Unit
3.2.2 Propane Gas Unit
Advertisement
Table of Contents
