Related Manuals for Genie GHDCONV43
Summary of Contents for Genie GHDCONV43
- Page 1 AHD, CVI, TVI and CVBS to HDMI / Composite Video - Built-in Loop Out GHDCONV43 User Manual Please read these instructions carefully before operating the unit and keep for further reference.
-
Page 2: Table Of Contents
Contents 1.0 Introduction ......................3 1.1 Product Features ...................3 1.2 Specification ....................3 1.3 Dimensions ....................4 2.0 Functions......................5 2.1 LED Indicators ....................5 2.2 2 IN/OUT Connector LED (BNC) ..............5 3.0 Installation ......................6 3.1 Loop Out Mode ....................6 3.2 CVBS Output Mode ..................6 3.3 AHD/TVI/CVI/NTSC/PAL/960H Input Mode ..........7 4.0 DIP Switch Settings .....................8 4.1 DIP Switch Settings and Button Functions Quick Reference ......8... -
Page 3: Introduction
The contents of this manual are subject to change without notice. The Genie GHDCONV43 is a multifunctional converter that can turn AHD, TVI, CVI and CVBS to HDMI and VGA. The built-in loop out port can be used as a second input port for camera video or as a CVBS output port for a DVR/CVBS monitor. -
Page 4: Dimensions
User Manual AHD, CVI, TVI and CVBS to HDMI / Composite Video - Built-in Loop Out 1.3 Dimensions 130mm... -
Page 5: Functions
2.0 Functions 2.1 LED Indicators DC JACK LED Green P Power ON Blue S Input 1 signal received Red H HDMI output linking 2.2 2 IN/OUT Connector LED (BNC) Green L Under LOOPOUT mode Blue S Input 2 signal received Red C CVBS OUT mode... -
Page 6: Installation
HD-CVI Camera *3 outputs: HDMI, VGA, loop output as a distributor. GHDCONV43 supports Video format manual select function: Step 1. Remove video input and set all dip switch off. Step 2. Press push left or right button to switch AHD or CVI format. -
Page 7: Ahd/Tvi/Cvi/Ntsc/Pal/960H Input Mode
User Manual AHD, CVI, TVI and CVBS to HDMI / Composite Video - Built-in Loop Out 3.3 AHD/TVI/CVI/NTSC/PAL/960H Input Mode VGA Monitor HDMI Monitor HD-CVI Camera HD-CVI Camera * Allow two camera inputs with 2 outputs: HDMI, VGA as a switcher. -
Page 8: Dip Switch Settings
4.0 DIP Switch Settings 4.1 DIP Switch Settings and Button Functions Quick Reference After setting the above DIP Switch function, GHDCONV43 must reboot for normal operation. 4.2 DIP Switch Settings and Button Function Detail DIP Switch 1 LOOPOUT / AHD and HDCVI /CVBS OUT Selection DIP Switch 1 ↑... - Page 9 User Manual AHD, CVI, TVI and CVBS to HDMI / Composite Video - Built-in Loop Out Button for underscan adjustment, press decrease CVBS OUT underscan, press enlarge CVBS OUT underscan. CVBS underscan adjustment is to avoid overscan situation on CRT screen (Overscan is the situation in which not all of a televised image is present on a viewing screen) which can cause the picture to enlarge and not see the edge of the screen.
- Page 10 User Manual AHD, CVI, TVI and CVBS to HDMI / Composite Video - Built-in Loop Out DIP Switch 3 PIP Mode DIP Switch 3 ↓ (PIP Mode) This function only activated on DIP Switch 2 ↓ Button as PIP sub-screen display position, press Counter-Clockwise to switch, press Clockwise switch When press...
-
Page 11: Restore Factory Default
2. If the PIP sub-screen from SD source, then the sub-screen picture will comes black edge. 3. This HDCVI input and HDCVI loop out do not support audio and data transmission. 4. When HDTVI,AHD or HDCVI input mode selection error, the picture will become black and white. Please have GHDCONV43 reboot. - Page 12 Sales +44(0)1707 330541 Enquiries sales@genieproducts.co.uk Website www.genieproducts.co.uk...
Need help?
Do you have a question about the GHDCONV43 and is the answer not in the manual?
Questions and answers