(See (6) for detailed first time use) You will receive a verification code, type this in and choose your password. NOTE: The Wi-Fi function cannot be used with this device. Open the app and click “+ Add”. Scan the QR-code on the back of your mr Safe Battery/Accu checker. 4. Connecting NOTE: make sure that the vehicle engine and any electrical loads are “OFF”!
Page 3
CAUTION: Reverse polarity will result in a blown fuse and may cause permanent damage. Damage due to reverse polarity is not covered by our guarantee. Do not use with positive ground electrical system (modern automobiles, RVs and trucks are negative ground, to check this: verify your car manual).
Once you are registered, the app will remember your account. ADDING DEVICES Now you can add your device. Press “+ADD” in the bottom center on the app, allow the app to use your camera and scan the QR-code on the back of your device.
Page 5
If you want to pair the device to a second account and you have already installed the device (and you do not have acces to the QR code on the back) you can always look up the QR code in the app by pressing the icon in the upper right corner..
OPMERKING: De Wi-Fi functie wordt niet ondersteunt met dit type toestel. Open de app en klik op “+ Add”. Scan de QR-code op het label achteraan de mr Safe Battery/Accu Checker. 4. Verbinden OPMERKING: Zorg dat de motor uitstaat en dat er geen elektrische ladingen zijn.
Page 8
Verbind de rode klem met de positieve (+) pool en de zwarte klem met de negatieve (-) pool. De Battery/Accu Checker zal aanspringen wanneer beide verbindingen gemaakt zijn. Zorg voor een goede verbinding door de oogjes (m6 grootte 6mm/1/4” diameter) rond de polen.
Page 9
Selecteer uw land en uw land- prefix-code (deze wordt normaal automatisch geselecteerd) en voer uw telefoonnummer in. Druk op “Get Verification” om uw verificatiecode te ontvangen. U zal een SMS ontvangen met een verificatiecode. Geef deze in bij “Security Code”, selecteer en bevestig uw wachtwoord en druk op “Sign Up”...
Page 10
OPMERKING: u kan over de statuslijn slepen om de historiek na te kijken OPMERKING: u dient 24V te selecteren als u de Battery Accu Checker met een 24V batterij hebt verbonden. Indien u het toestel wil koppelen aan een tweede account en u het toestel al geinstalleerd heeft (en u geen toegang heeft tot de QR code op de achterkant van het toestel) kan u in de app de QR code opvragen door op het icoon in de...
Need help?
Do you have a question about the BAC-100 and is the answer not in the manual?
Questions and answers