Troubleshooting - Cleanfix SW22 Manual

MAINTENANCE AND CLEANING ATTENTION
Take out the plug before any maintenance operaton on the head of the
machine.
NORMAL OPERATION OF MAINTENANCE:
- Clean the vacuum cleaner inside and outside.
- Clean the rubber which is in the cover of the head.
- Check the hoses and the electric cable.
IF LOOSE POWER
- Check the filter.
IMPORTANT: IF YOU CLEAN THE FILTER MICROWEB WITH WATER, WAIT
THAT IT IS DRY BEFORE TO
INSERT IN THE VACUUM AGAIN.
FAULT
Motor (suc on
turbine) does not
start
Sucton slowly
decreases
Sucton
suddenly
decreases
Dust ascapes
when cleaning
2) Transport
- To avoid damage during the transport by car or by truck, the vacuum
cleaner must be put inside his original package.MAINTENANCE AND
CLEANING ATTENTION
Take out the plug before any maintenance operaton on the head of the
machine.
NORMAL OPERATION OF MAINTENANCE:
- Clean the vacuum cleaner inside and outside.
- Clean the rubber which is in the cover of the head.
- Check the hoses and the electric cable.
IF LOOSE POWER
- Check the filter.
IMPORTANT: IF YOU CLEAN THE FILTER MICROWEB WITH WATER, WAIT
THAT IT IS DRY BEFORE TO INSERT IN THE VACUUM AGAIN.
TROUBLE SHOOTING
CAUSE
No electrical
power
Filter, nozzle,
sucton hose
or extensios
tube blocked
The paper
filtre bag or
the tank is full
Filter
incorrectly or
defectve
REMEDY
Check fuse,cable,plug and
socket
Check and clean
Switch off the cleaner and
empty
Check filter sealing. Replace
filter