Installing The Lcd Monitor To The Wall; Specifications - Sony INZONE SDM-U27M90 Operating Instructions Manual

Transporting
• Before transporting the LCD Monitor,
disconnect all cables.
• When transporting the LCD Monitor by
hand, hold it as shown below. Do not put
stress on the LCD panel and the frame
around the screen.
• When lifting or moving the LCD Monitor,
hold it firmly from the bottom.
• When transporting the LCD Monitor, do
not subject it to jolts or excessive vibration.
• When transporting the LCD Monitor for
repairs or when moving, pack it using the
original carton and packing material.
Installing the LCD
Monitor to the Wall
This LCD Monitor's instruction manual
only provides the steps to prepare the LCD
Monitor for Wall-Mount installation before it
is installed on the wall.
Your LCD Monitor can be mounted to a wall
using a suitable Wall-Mount Bracket (not
supplied). If the Table-Top Stand is attached
to the LCD Monitor, the LCD Monitor may
require detaching the Table-Top Stand.
Prepare the LCD Monitor for the Wall-Mount
Bracket before making cable connections.
For product protection and safety
reasons, Sony strongly recommends
that installation of your LCD Monitor
on the wall be performed by qualified
professionals. Do not attempt to install
it yourself.
• Follow the instruction guide provided with
the Wall-Mount Bracket for your model.
Sufficient expertise is required in installing
this LCD Monitor, especially to determine
the strength of the wall for withstanding
the LCD Monitor's weight.
• The screws for installing the Wall-Mount
Bracket to the LCD Monitor are not
supplied.
• The length of the screw for Wall-Mount
Bracket differs depending on the Wall-
Mount Bracket thickness. Please refer to
below illustration.
4 mm – 8 mm
Screw (M4)
Wall-Mount Bracket
LCD Monitor's rear
cover
• Refer to the following table for wall-mount
hole pattern.
Wall-mount hole
pattern
Model Name
SDM-U27M90 100 × 100 mm

Specifications

System
Panel system: LCD (Liquid Crystal Display)
Panel, LED Backlight
Sound output: 2 W + 2 W
Input/Output jacks
HDMI IN 1/2 (HDMI 2.1, HDCP 2.3)
(Stereo mini jack)
Headphone
1, 2, 3
USB Type-A
(PC)
USB Type-B
DP
USB Type-C, DP Alt mode
DisplayPort (Ver. 1.4)
19.5 V
Mains adaptor input
Power, Product Fiche and others
Power requirements
19.5 V DC with AC adapter
Rating: Input 100 V – 240 V AC, 50/60 Hz
Energy Efficiency Class* 1
G
Screen size (measured diagonally) (Approx.)
68.4 cm / 27 inches
Standby power consumption* *
1 2
0.5 W
Display resolution (horizontal × vertical)
(pixels)
3840 × 2160
Dimensions (Approx.) (w × h × d) (cm)
with Table-Top Stand
61.5 × 47.9 × 24.8
without Table-Top Stand
61.5 × 36.3 × 7.3
Stand width (Approx.) (cm)
45.3
Mass (Approx.) (kg)
with Table-Top Stand
6.8
without Table-Top Stand
4.6
Others
Operating temperature: 0 ºC – 40 ºC
Operating humidity: 10 % – 80 % RH
(non-condensing)
*1 This information is for EU and other
countries whose relevant regulation is
based on EU energy labelling regulation.
*2 Specified standby power is reached
after the LCD Monitor finishes necessary
internal processes.
Note
• Design and specifications are subject to
change without notice.
×
• Some of the on-screen instructions may
not apply to your LCD Monitor model.
• Product fiche in this manual is for
COMMISSION DELEGATED REGULATION
(EU) 1062/2010. Refer to its website for
(EU) 2019/2013 information.
Product registration number
(COMMISSION DELEGATED
REGULATION (EU) 2019/2013)
SDM-U27M90 (1125537)
Trademark Information
• The terms HDMI, HDMI High-Definition
Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc.
• DisplayPort™, the DisplayPort™ logo and
the DisplayHDR™ logo are trademarks
owned by the Video Electronics Standards
Association (VESA®) in the United States
and other countries.
• © 2021 NVIDIA, the NVIDIA logo, and
NVIDIA G-SYNC Compatible are trademarks
and/or registered trademarks of NVIDIA
Corporation in the U.S. and other countries.
• USB Type-C® and USB-C® are registered
trademarks of USB Implementers Forum.
GB
5
GB