Advertisement
Quick Links
Once You Have Finished Using The Appliance
- Unplug the appliance from the main power supply
- Drain the water out of the appliance
- Clean the appliance
Tips to keep your iron working like new
1. Use Distilled or Lime Free Water: Tap water (even if it's filtered) contains
minerals that can clog, corrode, and damage the iron, dramatically reducing
steam and potentially clogging your iron. Always use distilled or low lime
water in your iron.
2. Empty the Water Tank: Have you finihsed ironing but have not used up all
the water? Then empty the water reservoir. Stagnant water evaporates
slowly, causing lime deposits. Therefore store your steam iron without
water to keep your iron free of calcium build up.
3. Keep it Cool: The iron's water reservoir should be filled when the iron is
cool and before it is plugged in.
4. No Solvents: Do not use solvents, or products with an acid or base pH such
as bleach, or abrasive products, for cleaning the appliance. Never submerge
the appliance in water or any other liquid or place it under running water.
5. Safe Power: If an extension cord is absolutely necessary, a 15-amp cord
should be used. Cords rated for less amperage may overheat. Care should
be taken to arrange the cord so that it cannot be pulled or tripped over. We
recomment no more than a 10' extension cord and 14 guage wire. Lower
rated cords may void your warranty.
FROM WHERE YOU LIVE
TO WHAT YOU WEAR, WE'RE
RIGHT THERE WITH YOU
At Reliable, we do what we love, and we take pride in
doing it right. Quality, functionality, design and customer
service play an equally important part in delivering what's
right for you. From irons to steam cleaners to sewing
machines, you can count on us to be right there with you.
That's the Reliable Way.
For more information on your product,
to view instructional videos or to
download the full user manual, visit
reliablecorporation.com
Having trouble? Call us.
For service and/or technical assistance
on this product, call our toll free
number or email our support staff
1-800-268-1649
support@reliablecorporation.com
VELOCITY 240IR
QUICK START GUIDE
Advertisement
Summary of Contents for Velocity 240IR
- Page 1 VELOCITY 240IR Once You Have Finished Using The Appliance - Unplug the appliance from the main power supply FROM WHERE YOU LIVE - Drain the water out of the appliance - Clean the appliance TO WHAT YOU WEAR, WE’RE RIGHT THERE WITH YOU Tips to keep your iron working like new 1.
- Page 2 Polyamide, upright position 15-30cm Synthetic If your Velocity 240IR is not producing any steam, or producing very little, first Plug your iron in. away from the fabric. check that your unit is on with the steam button engageed and that enough Polyester, time has passed for the unit to have had a chance to heat up.