Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for LapSafe ClassBuddy Locker 32
- Page 1 ClassBuddy Locker 32 ™ User Manual...
-
Page 2: Table Of Contents
Introduction Page No Congratulations and thank you for purchasing a ClassBuddy™ Locker 32 Introduction from the LapSafe® ClassBuddy™ range. Your product comes with a lifetime Important Actions parts and labour warranty which you will need to activate immediately. Warranty Helpful Links... -
Page 3: Important Actions
Upon delivery of your new ClassBuddy™ Locker 32 you must: The ClassBuddy™ range comes with Lifetime Parts & Labour Warranty. Full details of our warranty are on our website lapsafe.com/warranty • Take a note and store in a safe place your product serial number To activate your FREE Lifetime* Parts and Labour Warranty, which can be found on the silver plate on the side of the unit. -
Page 4: Overview
Overview Installation Your ClassBuddy™ Locker 32 is supplied fully assembled, tested and ready The ClassBuddy™ Locker 32 is floor standing and because of its weight it for installation. must be secured to a wall to prevent any risk of it toppling forwards. An adjustable, anti-topple bracket is integrated into the top of the locker and Each Classbuddy™... -
Page 5: Front Door Operation
Front Door Operation Power Management Cassette Once the door lock is released the hinge allows the locker door to swing The power management cassette in the top of your ClassBuddy™ Locker through approximately 150 degrees until it meets the side of the locker. 32 may get warm when it is handling a significant electrical load for a period of time and this, in turn, may make the top of the locker feel warm Do not let go of the door while it is moving. -
Page 6: Installing Ac Adaptors
If the trip will not re-set or it continues to trip, there may still be a fault somewhere or the trip may have developed a fault. Please contact Support on 0800 130 3456 or support@lapsafe.com... -
Page 7: Positioning The Charging Leads
Positioning the Charging Leads Network Connectivity Option Open the front door of the locker and consider where the charging lead Below the front door there is a key controlled compartment that is ready needs to be positioned based on the device that is to be stored/charged. to house a network switch or switches. -
Page 8: Health & Safety
ClassBuddy™ Locker 32 into Please be advised of the following safety advice: position. At no time are the service areas of the ClassBuddy Locker 32 to be opened by anyone other than an authorised person. Modifications... -
Page 9: Cleaning
Do not get the power cassette or the locker sockets wet • Do not remove doors • • Do not soak any area with solvent • Do not modify the ClassBuddy™ Locker 32 in anyway without • Do not use solvent cleaners on the locks contacting LapSafe® first... -
Page 10: Safety Decleration
CE Testing, Conformity and Declaration of LapSafe® At LapSafe® we are proud to confirm that ALL of our electrical products, going back over ten years, have been thoroughly tested and certified (by an authorised and INDEPENDENT testing house) and accordingly have been clearly CE marked. - Page 11 0800 130 3456 sales@lapsafe.com lapsafe.com LapSafe Self-Service Solutions Ltd ® 3 Wakes Hall Business Centre Wakes Colne Colchester Essex CO6 2DY...