Main Switch - Toyota IPUP T100L Instruction Manual

IPUP T100L / EC100L Instruction Manual
4. OPERATION

4-2. Main Switch

Power ON
The main power switch is located on the front panel as shown below.
·Turning this switch on （by pressing the 1 mark side） turns the green indicator LED
light up.
· When the hand-held controller is in use, the POWER indicator LED light up.
Power OFF
Make sure the pump has stopped.
·Turn the switch off （by pressing the 0 mark side）.
· When the hand-held controller is in use, the POWER indicator LED light will go out.
WARNING
http://www.toyota-industries.com/
Main Switch
ON
OFF
Do not use a sharp object to push the switch. A sharp object
may damage the switch.
Make sure the main power switch on the pump is off and the
cuircit breaker on your facility is off before unplugging the
power connector.
When turning on after turning off, wait 30 seconds so that
the electricity of the DC capacitor in the converter can be
discharged. Otherwise, the pump cannot start due to
converter error (FC Alarm).
TOYOTA INDUSTRIES CORPORATION
43