Advertisement
Quick Links
Model: 2050
Sit-To-Stand Desk
Owner's Manual
Recommended
Max Load: 25 lbs. (11.3 kgs.)
VISIT OUR WEBSITE: WWW.THEFITDESK.COM
OR CALL US AT 1-336-423-5029 MONDAY - FRIDAY 9 A.M. - 5 P.M. EST
DISTRIBUTED BY FD PRODUCTS LLC.
1161 SOUTH PARK DRIVE, KERNERSVILLE NC 27284
IMPORTANT: READ THE OWNER'S MANUAL BEFORE ASSEMBLING
Advertisement
Summary of Contents for FitDesk 2050
- Page 1 Model: 2050 Sit-To-Stand Desk Owner’s Manual Recommended Max Load: 25 lbs. (11.3 kgs.) VISIT OUR WEBSITE: WWW.THEFITDESK.COM OR CALL US AT 1-336-423-5029 MONDAY - FRIDAY 9 A.M. - 5 P.M. EST DISTRIBUTED BY FD PRODUCTS LLC. 1161 SOUTH PARK DRIVE, KERNERSVILLE NC 27284...
-
Page 3: Table Of Contents
Assembly..............5 Safety Warnings / Maintenance......2 Operational Instructions........7 Warranty...............8 Customer Support..........3 Tools / Hardware / Parts........4 INTRODUCTION Congratulations on taking a STAND for FitDesk your well-being by purchasing a ® 22.8” in. 30.7” in. 580 mm Sit-to-Stand Desk 780 mm We know that your chair will still be a part... -
Page 4: Safety Warnings / Maintenance
WARNING! This height adjustable desk is designed for use in dry work areas only. The desk height is adjustable so that it can be positioned at the most ergonomically suitable height. Any other use is at user’s risk MAINTENANCE The integrity of the FitDesk ® Sit-To-Stand Desk can only be maintained when it is regularly inspected for damage and wear. -
Page 5: Customer Support
CUSTOMER SERVICE QUESTIONS NEED HELP? CONTACT US FIRST 1-336- 423-5029 MONDAY - FRIDAY 9 A.M. - 5 P.M. EST EASY TO USE CUSTOMER TICKETING Step 1: www.thefitdesk.com Step 2: “Support” Step 3: “Submit A Support Ticket” customerservice@thefitdesk.com FOR FASTEST POSSIBLE SERVICE PLEASE HAVE AVAILABLE Model # (refer to this manual) - Serial # (located on Where is this located?) WWW.THEFITDESK.COM... -
Page 6: Tools / Hardware / Parts
Estimated Assembly Time : 10 minutes AA. (1) BB. (1) 4mm Allen Wrench 5mm Allen Wrench Each FitDesk Sit To Stand Desk comes equiped with two Allen Wrenches (AA) (BB). ® HARDWARE Note: Hardware and Tools not shown to actual size. -
Page 7: Assembly
ASSEMBLY NOTE: Before assembly please check all parts carefully. Step 1: Attach the Base (B) and the Post (C) by using the supplied 5 mm Allen Wrench (BB) to tighten the M8 x 20 Allen Bolts (EE). Figure 1 Note: Do not overtighten Allen Bolts. FIGURE 1 Step 2: Attach the Desktop (A) and the Post (C) by using the supplied 4 mm Allen Wrench (AA) to... - Page 8 Desktop (A). Figure 4 FIGURE 4 Step 5: Insert the Cable Management Box (E) into the Desktop (A). Figure 5 FIGURE 5 Your Model 2050 Sit To Stand Desk is now ready to use. ® FitDesk...
-
Page 9: Operational Instructions
OPERATIONAL INSTRUCTIONS NOTE: Before operating please read carefully HEIGHT ADJUSTMENT Step 1: To adjust the height of the Desktop (A) push handle up and hold. FIGURE 1 Step 2: Using both hands push down on the Desktop (A) to a desired height. Figure 2 Step 3: Using the same motion lift up the Desktop (A). -
Page 10: Warranty
This limited warranty is applicable to each original end-customer (hereinafter “Customer”) purchasing the Model: 2050 Sit-To-Stand Desk consisting of the structural metal frame (hereinafter the “Structural Frame”) and various other non-frame components (hereinafter the “Non-Frame Parts”) sold by FD Products, LLC (hereinafter “Company”) for Customer’s own use and not for resale. - Page 11 4. DISPUTE RESOLUTION: This FitDesk Limited Warranty shall be governed by and construed in accordance with the laws of the State of North Carolina, without regard to its principles of conflicts of law. The parties acknowledge the exclusive jurisdiction of the federal and state courts of the State of North Carolina.
- Page 12 / Fitdesk ® FitDesk is a registered trademark of FD Products LLC. - All Rights Reserved 2016 Updated 12/5/2016...
Need help?
Do you have a question about the 2050 and is the answer not in the manual?
Questions and answers