Huawei MatePad User Manual page 85

1
Pair your tablet with the Bluetooth device.
After the pairing is successful, the Bluetooth device name will be displayed in the Paired
devices list on the Bluetooth settings screen.
2
On your tablet, go to Settings > Biometrics & password > Smart Unlock, and enable
Smart Unlock.
3
Follow the onscreen instructions to set the lock screen password. Skip this step if a lock
screen password has already been set.
4
On Smart Unlock the screen, touch Add device, select the desired Bluetooth device from
the Paired devices list, and follow the onscreen instructions.
After it has been selected, the Bluetooth device name will be displayed in the Unlocking
Devices list.
When your tablet is connected to a Bluetooth device, turn on the screen of your tablet
and swipe on the screen to unlock it.
To learn more about Smart Unlock, touch
Enable Enhanced Mode
For greater security, enable Enhanced mode when using Smart Unlock so your tablet will
only be unlocked when it detects a Bluetooth device that supports Enhanced mode.
On the Smart Unlock screen, enable Enhanced mode and perform operations as prompted.
It may take some time for your tablet to establish a trusted connection with a Bluetooth
device.
The Bluetooth device will then authenticate your tablet when:
The Bluetooth device is near your tablet.
•
You are wearing the Bluetooth device.
•
Your tablet has previously been unlocked using any unlock method (PIN, pattern, or
•
password) on this device.
Set a SIM PIN Lock
A PIN is the identity code of a SIM card, and can be set as the SIM card lock. After you set it
up, you will be required to enter the correct PIN to unlock the SIM card every time you power
on your tablet or switch to a new tablet to prevent unauthorized access.
If you have entered a wrong PIN and exceeded the maximum number of attempts allowed to
unlock the PIN, you will need to enter the PIN Unlocking Key (PUK) then reset the PIN. If you
exceed the maximum number of attempts allowed to unlock the PUK, your SIM card will be
permanently blocked.
The PIN and PUK of your SIM card are provided by your carrier. The number of digits and
maximum number of attempts allowed to unlock your PIN and PUK are subject to your
carrier.
1
Go to Settings > Security > More settings to enter the SIM lock settings screen.
2
Enable Lock SIM card, enter the PIN, then touch OK.
on the Smart Unlock screen.
Settings
82