Related Manuals for Krieger KRP150
Summary of Contents for Krieger KRP150
- Page 1 150W PURE SINE WAVE INVERTER model no. KRP150 IMPORTANT: INSTRUCTION Please read this manual carefully before running this power inverter MANUAL and save it for reference.
- Page 2 Our extensive line of power inverters, jump starters, booster cables and more were developed with our roads and drivers in mind. With hundreds of automotive products, Krieger has helped keep our customers on the go by providing well-priced automotive products with competitive performance and durability.
-
Page 3: Table Of Contents
TABLE OF CONTENTS Safety Information Welcome A Higher Wattage Inverter May Be Required Warnings, Cautions and Notes Warnings: Inverter Output Cautions: Inverter Operating Environment Power Requirements Getting Started Features Operating Inverter Inverter Operation Operation Guidelines Battery Operating Time Troubleshooting & Specifications Troubleshooting Specifications Warranty and Returns... -
Page 4: Safety Information
KRP150 | contact us 1-866-295-6775 WELCOME WARNINGS, CAUTIONS AND NOTES Please read this manual thoroughly before It is very important that any operator and installer of this inverter read and follow all WARNINGS, installing and operating your new Krieger inverter. -
Page 5: Cautions: Inverter Operating Environment
Damage caused by reversed • Keep the area surrounding the inverter clear polarity is not covered under the Krieger to ensure free air circulation around the unit. warranty. Do not place items on or over the inverter Making the connection to the positive terminal •... -
Page 6: Power Requirements
KRP150 | contact us 1-866-295-6775 POWER REQUIREMENTS When a motorized appliance or a tool turns on, there is an initial surge of power to start. This surge of power is referred to as the "starting load" or "peak load." Once started, the tool or appliance requires less... -
Page 7: Getting Started
FEATURES AC Outlet LED light indicator USB QC3.0 5V/3A, 9V/3A, 12V/2.5A Ventilation holes... -
Page 8: Operating Inverter
The KRP150 AC output waveform is called “pure / true sine wave” which is similarly to the sine wave shape of utility power. 1. Plug the included DC cable into the DC port on the KRP150 and connect to a 12V charging port in your vehicle. -
Page 9: Inverter Operation
KRP150 is powering. If an AC device is rated higher than 150W and plugged into the KRP150, the inverter will shut down. The LED light will alternate from BLUE to RED. If the KRP150 exceeds a safe operating temperature, due to insufficient ventilation or a high-temperature environment, it will automatically shuts down. -
Page 10: Troubleshooting & Specifications
KRP150 | contact us 1-866-295-6775 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION LED light indicator • Low battery voltage • Recharge the battery. Check turns RED shutdown feature turns if cables and connections are OFF the inverter. secure. • Overheating •... -
Page 11: Specifications
SPECIFICATIONS KRP150 Output Continuous Watts (W) 150 W Surge Capacity (Peak Power) 300 W Rated Input DC (V, A) 13.8 V battery, 15 A tabs Input Voltage Range 10.5 to 15.5 V DC +/- 0.3 V Rated Frequency (Hz) 60 Hz±1... -
Page 12: Warranty And Returns
This Krieger product carries a two (2) year warranty against defects in workmanship and materials. At its discretion, Krieger agrees to have any defective part(s) repaired or replaced free of charge, within the stated warranty period, when returned by the original purchaser with proof of purchase.
Need help?
Do you have a question about the KRP150 and is the answer not in the manual?
Questions and answers