PARK WAREHOUSE ZipCrank 685se275-4 Installation

P A R T S L I S T
Item Qty Description
A 1 Height Adjuster Frame
B 1 Electrical Handy Box
C 1 Height Adjust Label
D 8 3/8" X 3" Hex Bolt
E 8 3/8" Hex Nut
F 16 3/8" Flat Washer
Wall structure must safely support additional weight of height adjuster.

Inspect all contents prior to installation. Report any missing parts to dealer immediately.

Read all instructions before proceeding.
1. Mount Height Adjuster Frame (A) to wall structure with 3/8" X 3" Hex Bolts (D), 3/8" Hex Nuts (E),
3/8" Flat Washer (F) and 3/8" Lock Washer (G). See Figure 1.
2. Level Height Adjuster Frame (A) to playing surface/wall structure. Tighten all hardware.
3. Mount backboard assembly to the Height Adjuster Frame (A) using mounting brackets shown.
Hardware included in backboard packaging or existing in previously installed product. See Figure 1.
4. Mount rim to backboard. Hardware included in rim packaging or existing in previously installed
product.
5. Level backboard and rim to playing surface. Tighten all hardware.
It is strongly recommended that a qualified electrician be used to do all wiring.
6. Using the supplied Electrical Handy Box (B) make the junction from the actuator to either the BA980
Electric Saddle & Wand Box Assembly (I) or the BA975KS Key Switch (J). If using the BA980 Electric
Saddle & Wand Box Assembly (I) find an easily accessible place on the wall structure. Using the 1/2"
X 1 1/2" Hex Bolts (K) and the 1/2" Flange Nuts (L) clamp it to the wall structure. See Figures 1 & 2.
ZipCrank Height Adjuster
SKU: 685se 27 - & 5 4
Item
G
H
I
J
K
L
Warning!
980RSE = 175lbs , 980RTE = 190lbs
Warning!
685se275- Installation 5
Qty Description
8 3/8" Lock Washer
1 BA980EW Electric Wand (Optional)
1 BA980 Electric Saddle & Wand Box Assembly (Optional)
1 BA975KS Key Switch (Optional)
2 1/2" X 1 1/2" Hex Bolt (Included w/Saddle & Wand Box)
2 1/2" Flange Nut (Included w/Saddle & Wand Box)
1