Advertisement
Quick Links
SLAB Shower Base:
CSB3636
CSB3636ADA
CSB6030
CSB6030ADA
SLAB SOLID SURFACE
SHOWER BASE
SLAB SOLID SURFACE SHOWER BASES
RECOMMENDED CLEANING & MAINTENANCE
PROCEDURES
Acorn's Corterra Solid Surface material is composed of Cast Polyester Resin, Aluminum
Trihydrate and Fillers. It is resistant to stains, impacts and burns. Complies with ANSI
Z124.3.
Wash with a non-abrasive all-purpose cleaner and rinse with water. Wipe dry. Never use
cleansers with strong chemicals such as toilet bowl cleaners, rust removers, ceramic
cooktop cleaners, paint or varnish removers, drain cleaners, metal cleaners, laquer
thinners or oven cleaners.
Surface damage, such as minor chips, scratches, burn marks and graffiti can be
repaired with a fine grit abrasive cleaner, a Scotch-Brite pad or fine grit sandpaper. For
more serious physical damage caused by vandalism, an Acorn Solid Surface Repair Kit
is available. Contact factory for details.
Part #: 0696-001-001
INSTALLATION, OPERATION
Model Shown: CSB3636ADA
N E O - M E T R O
15125 Proctor Ave. • City of Industry, CA 91746 USA
TF 800.488.8999 • PH 626.336.4561 • FX 626.961.2200
TOLL FREE
800-743-8259 •
Page
1
of 4
& MAINTENANCE MANUAL
®
b y A C O R N
Acorn Engineering Company
NEO-METRO FIELD SERVICE
LOCAL
626-855-4866 •
®
FAX
626-855-4863
Date: 01/31/22
Advertisement
Related Manuals for Acorn Neo-metro SLAB CSB3636
Summary of Contents for Acorn Neo-metro SLAB CSB3636
- Page 1 Surface damage, such as minor chips, scratches, burn marks and graffiti can be repaired with a fine grit abrasive cleaner, a Scotch-Brite pad or fine grit sandpaper. For more serious physical damage caused by vandalism, an Acorn Solid Surface Repair Kit is available. Contact factory for details.
- Page 2 INSTALLATION, OPERATION & MAINTENANCE MANUAL REMOVE SHOWER BASE CAREFULLY HANDLING FROM PACKAGING Carefully remove Base from packaging prior to installation. Inspect for any damage. Avoid REMOVE PACKAGING placing Base on its edges; this precaution will WITH CARE prevent damage to corners. AVOID STANDING BASE ON EDGES LEVELING...
- Page 3 INSTALLATION, OPERATION & MAINTENANCE MANUAL DRAIN GRATE GRID STRAINER DRAIN AND WASTE INSTALLATION: 1 1 1 1 4 CAULKING NUT WRENCH 1. Remove Drain Grate and assemble Drain Body to Corterra Base and tighten Locking CAULKING NUT Nut to affix Drain to Base CORTERRA BASE RUBBER CAULKING...
- Page 4 INSTALLATION, OPERATION & MAINTENANCE MANUAL 1 1 1 1 5 RECOMMENDED INSTALLATION FOR STEP 1: MODEL WITH TILING FLANGE OPTIONS: 1. Allow the Rough Wall material with a gap of approximately 1/2” (Do not allow Rough LATH / PLASTER Wall Material to overlap Tiling Flange) BOARD, ETC.
Need help?
Do you have a question about the Neo-metro SLAB CSB3636 and is the answer not in the manual?
Questions and answers