Before Using Your Massager - Lunix LX10 Manual

Before Using your Leg
1.
After unpacking the leg massager, please check the integrity of
the device and accessorises and look for any damages.
2.
Before first use, charge the massager until the blue level indicator
stops blinking (see below the section how to charge)
3.
Place the device on a flat, level surface. The sleeves are marked L
and R for Left and Right to indicate the leg placement.
4.
First insert your foot (#1 indicated on the massager), then your
calf (#2) then your thigh (#3).
5.
Use the hook and loop fasteners to secure your foot, calf and
thigh inside the massager. Secure your legs tightly.
6.
Insert both air pressure connectors into the control unit.
7.
Use your massager OR plug the AC power adapter to the outlet if
it's running out of battery.
8.
Press the Power Button then the Program Button in order to start
the massage.
NOTE:
Please be sure to remove all sharp jewelry. Do not cross legs.
IMPORTANT:
can make the leg massager fit on anyone's legs, even swollen legs or
just naturally big size! The extension can add 7.5 inches on each size
that will fit your whole beloved personal need!
10
Massager
This package INCLUDES leg wraps extensions that