Advertisement
Quick Links
ELECTRONIC TEMPERATURE SWITCH
User Manual for SRTH600-206-2301 & 2302
Product Description
SRTH600-206 Electronic Temperature Switch can monitor gas and liquid temperature. Users
can easily set the switching points and hysteresis point. The overload capacity of the
temperature switch is from a few uA up to 500mA. It transfers the collected temperature signal
into a standard current / voltage signal output at the same time. The display head and connector
can rotate freely, which ensure that the products can work well in some difficult-to-install
situations as well.
Features
Adjustment ranges from 0 to full range value
Repeatability 0.5%
Long-term stability 0.5%FS per year
The control output: Relay (NC/NO)
Analogue output (4-20mA)
IP65
Thank you for choosing L-com product. To ensure safe, accurate performance and product
longevity, please take a moment to familiarize yourself with this manual before powering the
device. Please keep it handy for future reference. In case of any questions regarding the
installation or use of product, please call us at 800.341.5266.
Reach out to us at customerservice@l-com.com and visit our website at www.l-com.com
1
Advertisement
Related Manuals for Infinite L-com SRTH600-206-2301
Summary of Contents for Infinite L-com SRTH600-206-2301
- Page 1 ELECTRONIC TEMPERATURE SWITCH User Manual for SRTH600-206-2301 & 2302 Product Description SRTH600-206 Electronic Temperature Switch can monitor gas and liquid temperature. Users can easily set the switching points and hysteresis point. The overload capacity of the temperature switch is from a few uA up to 500mA. It transfers the collected temperature signal into a standard current / voltage signal output at the same time.
- Page 2 Signal Output Output mode Relay（DC30V/1A,AC125V/0.3A） Normal state Normally open (open) Normally closed (connection) Alarm status Normally closed (connection) Normally open (open) Analog output 4-20mA Electrical Interface Analogue Output (Relay Output): 4-20 mA Function Color +Vcc Brown Switching COM White Blue Switching out1 Black Signal Output...
- Page 3 Exit: Exits the setting menu and enter into the temperature display interface. Unit: In Unit set up, there are two setting options (°C/ F), user can choose the actual use of the range. S1: Setting of the first switching point, user can adjust it according to the actual testing range.
- Page 4 Operating Instructions...