Summary of Contents for Kellfri 18-CB800
- Page 1 18-CB800 CEMENT MIXER CAREFULLY READ THE OPERATING INSTRUCTIONS BEFORE USING THE PRODUCT! OPERATING INSTRUCTIONS TRANSLATED FROM THE ORIGINAL...
-
Page 2: Product Information
Nordic countries and Europe. PRODUCTINFORMATION Kellfri cement mixer CB 800 is robust which guarantees you a perfect product with a long lifes- pan. The container’s opening is 150 cm and is not tiltable. The machine is connected to tractor through the PTO shaft. The tractor engine’s rpm should be at 540 rpm. -
Page 3: For Your Safety
If the instructions manual is damaged or otherwise unusable, please contact and order a new one from your retailer. For more information visit our website: www.kellfri.co.uk Do not use this equipment if you are feeling sick, tired or in influence of alcohol. Nor if you are under the influence of strong medications or drugs, suffering from strong depression or se- vere mental illness. -
Page 4: Personal Protection
PERSONAL PROTECTION Always wear suitable clothing and footwear. Do not wear loose clothing or jewelry when using the machine. Remember to put up long hair when operating rotating machines. Wear protec- tive gloves, to prevent risking burns on contact with hot surfaces such as exhaust system, and to avoid oil and gasoline on the skin. - Page 5 SURROUNDINGS Make sure your working area is clear from people, children and objects before installing and using the machine. Risk of serious injuries can occur during operation. Take an extra caution when children are in the area where the equipment/ product is being use or stored.
-
Page 6: Operating The Machine
OPERATING THE MACHINE Only people who understand the safety information and instructions in this manual may oper- ate the equipment. Be alert and careful when working with the machine and only use the tool or product in the manner described in this manual. Avoid using the machine at temperatures lower than -20 °... -
Page 7: Transport And Storing
TRANSPORT AND STORING Make sure there are no people, children and foreign objects around the area before transport- ing the machine. Always take an extra caution during the transport. Ensure that the product is well secured and that transport brackets are mounted. Always place the load as low as pos- sible. -
Page 8: Warranty Terms And Conditions
Other equipment must meet the hardware requirements of the Directive. Tina Baudtler, VD Kellfri AB is constantly working on further developing their products and therefore reservesthe right to modify, among other things the design and appearance without notice. CUSTOMER SERVICE You are always welcome to give your feedbacks, reviews or ask us about our tools and products.
Need help?
Do you have a question about the 18-CB800 and is the answer not in the manual?
Questions and answers