Advertisement
Table of Contents
- 1 Step 1 to Fit the Small Gear to the Motor
- 2 Step 2 Push the Motor Gear through the Side of the Car Body
- 3 Step 3 Pressing GENTLY Fit the Solar Panel Onto the Roof of the Car
- 4 Step 4 Fit the Gear Wheel Onto the Rear Axle
- 5 Step 5 Feed the Rear Axle through the Holes at the Rear of the Car and Fit a Set of Wheels on It
- 6 Congratulations! Your F1 Solar Car Is Ready to Race!
- 7 WARNING and Safety Instructions
- Download this manual
F1 MINI SOLAR RACING CAR
Part of our world's smallest range
To build your own super fast F1 racing car, you will need
1
these components:
Wheel
Axles
Solar Panel
with Motor
3
Step 2 Push the motor gear
through the side of the car body
as shown in the picture.
Gears
Body
Wheels
2
Step 1 To fit the small gear to the motor; place the flat side of the gear on
to the axle. Allow a gap of approx. 1mm between the motor and the gear.
IMPORTANT: make sure you do not press too hard as this may damage
the components.
Tel: 0845 0031353
www.thesolartrader.co.uk
Product Code:
02006SS01
for everything
under the sun
Advertisement
Table of Contents
Summary of Contents for The Solar Trader F1
- Page 1 F1 MINI SOLAR RACING CAR Part of our world’s smallest range To build your own super fast F1 racing car, you will need these components: Wheel Axles Gears Step 1 To fit the small gear to the motor; place the flat side of the gear on to the axle.
- Page 2 • Care should be taken if playing with this in direct • To ensure your F1 solar racing car remains in good working order, clean the wheels and solar sunlight to protect children from UV light. panel on a regular basis by gently wiping to remove dust/dirt that may slow your car down.
Need help?
Do you have a question about the F1 and is the answer not in the manual?
Questions and answers