Advertisement
Available languages
Available languages
Read, understand, follow and save these instructions.
Failure to follow all warnings and instructions may result in product failure, property damage and/or
serious personal injury.
The warnings, cautions, and instructions discussed in this instruction manual cannot cover all
possible conditions or situations that could occur. The operator must understand common sense and
caution are factors which cannot be built into this product, but must be supplied by the operator.
INTENDED USE
The purpose of this XX-Chock Stabilizer is to enhance trailer occupant comfort by preventing the tandem wheels from
moving. When the wheels are chocked, the annoying rocking motion is essentially eliminated.
XX-Chock Stabilizer
#10201099
WARNING:
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Polestar 10201099
- Page 1 XX-Chock Stabilizer #10201099 WARNING: Read, understand, follow and save these instructions. Failure to follow all warnings and instructions may result in product failure, property damage and/or serious personal injury. The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur.
- Page 2 TECHNICAL SPECIFICATIONS Property Specification Minimum adjustment length 1-3/8 in. Maximum adjustment length 17-1/2 in. Note: Do not attempt to exceed the minimum or maximum adjustment length! OPERATION/ADJUSTMENT Please install both stabilizers, one on each side of your trailer, for the product to work correctly. Step 1: Use your hands to open the stabilizer to the size closest to the tire.
- Page 3 Step 3: If there is interference, you can turn the stabilizer upside down. To Uninstall: Place the wrench on top of the middle screw and turn counterclockwise to remove the stabilizer from tires. Note: Be sure to uninstall the stabilizers before attempting to move your trailer. Limited 1-Year Warranty Polerstar makes every effort to assure that this product meets high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of one year from the...
- Page 4 Stabilizater de XX-Cale #10201099 AVERTISSEMENT: Lisez, comprenez, suivez et enregistrez ces instructions. Le non-respect de tous les avertissements et instructions peut entraîner une défaillance du produit, des dommages matériels, des blessures graves. Les avertissements, mises en garde et instructions décrits dans ce manuel d'instructions ne peuvent pas couvrir toutes les conditions ou situations pouvant survenir.
- Page 5 SPÉCIFICATIONS TECHNIQUES Spécification Propriété Longueur de réglage minimale 1 3/8 pouces Longueur de réglage maximale 17 1/2pouces Remarque: N'essayez pas de dépasser la longueur de réglage minimale ou maximale! FONCTIONNEMENT / RÉGLAGE Veuillez installer les deux stabilisateurs, un de chaque côté de votre remorque, pour que le produit fonctionne correctement.
- Page 6 Étape 3: S'il y a des interférences, vous pouvez retourner le stabilisateur. Pour désinstaller: Placez la clé sur le dessus de la vis du milieu et tournez dans le sens antihoraire pour retirer le Remarque: stabilisateur des pneus. assurez-vous de désinstaller les stabilisateurs avant d'essayer de déplacer votre remorque.
Need help?
Do you have a question about the 10201099 and is the answer not in the manual?
Questions and answers