Advertisement
Adding/Deleting Regular Users
Regular users may access the outputs remotely via SMS or missed call (relay 1),
but may not change any settings on the device. Only an Authorised User (step 3)
may add or delete Regular Users.
Add User: Type the word "ADDUSER" followed by a space character, followed
by the cell number that you wish to add in the same format (with country code) as
step 3.
E.g.
ADDUSER 27823259021
Delete User: Type the word "DELUSER" followed by a space character,
followed by the cell number that you wish to delete in the standard format.
E.g.
DELUSER 27823259021
Check User: Type the word "CHKUSER" followed by a space character,
followed by the stored cell number that you wish to verify in the standard format.
A response will be sent back indicating whether the number is currently stored on
the device.
E.g.
CHKUSER 27823259021
Additional Commands
Query balance (prepaid only)
Solicit a status report
Please Note:
This document highlights the basic and most popular commands involved in
setting up the device. For a full list of settings that can be manipulated remotely,
please see the GSM Communicator SMS Setup Commands document
included in the web download. Alternatively, the user can make use of the free
and easy-to-use Sentry GSM Management Platform software and dongle to set
up the unit via USB.
S-GSM-CQ/REV1.0
BALANCE
REPORT
2014-02-18
7
Advertisement
