Recording While Playing Along With A Built-In Song - Casio Keyboard CDP-200R User Manual

Recording while Playing Along
with a Built-in Song
This section explains how to play along and record along with
one of the keyboard's built-in songs.
● The following operations and settings also are
recorded along with your keyboard play.
Tone number, song number, pedal operation, tempo, reverb,
chorus, layer/split settings, pitch bend wheel operation
• There can be only one recording of keyboard play with a
built-in song in recorder memory. Making a new recording
replaces (deletes) previously recorded data.
1.
br
Press .
2.
8
Press .
This will enter playback standby.
3.
8
Press again.
This will enter record standby.
Flashes
4.
cl
Use (10-key) to enter the song number you
want to assign to the recording.
C
Lights
Flashes
Recording Your Keyboard Play
5.
bp
Press to cycle through the parts in the
sequence shown below.
Right-hand Recording
Left-hand Recording
Both-hand Recording
Example: Left-hand part recording
Flashes
• Configure tone and tempo settings at this time as well.
6.
bo
Press to start built-in song playback and
recorder recording.
Play along with the playback.
• To stop recording part way through, press
7.
Recording will stop automatically when the end
of the built-in song is reached.
This will enter playback standby.
8.
bo
Press .
This will start playback of what you recorded.
bo
• Each press of starts and stops playback.
9.
8
Press twice to exit the recorder mode.
Disappears
■ To delete recorded data
After step 2 of the above procedure, do hold down
message "Song Del?" appears on the display. Press [+] (YES)
to delete the song.
bo
.
Lights
8
until the
E-49