Table of Contents
Advertisement
Message settings
(Menu 5.9)
Use this menu to set up various options for using
messaging service.
SMS
(Menu 5.9.1)
You can configure default SMS settings.
•
Settings x: set the following properties in a
profile:
Centre address: store or change the number of
your message centre.
Expiration: set the length of time your messages
are stored in the SMS centre while attempts are
made to deliver them.
Default type: set the default message type. The
network can convert the messages into the
selected format.
Name: enter a profile name.
•
Sending options: set up the following options for
sending an SMS message:
Reply path: allow the recipient to reply to you
through your message centre.
Delivery report: set the network to inform you
when your message has been delivered.
Network selection: select a preferred data
transmission method.
Keep a copy: set your phone to leave copies of
the messages in the Sentbox folder after sending
them.
Character support: select a character encoding
type. If you select Automatic, the phone switches
the encoding type from GSM-alphabet to Unicode if
you enter a unicode character. Use of unicode
encoding will reduce the maximum of number in a
message to about half. If this menu is not shown,
your phone provides the Automatic character
encoding by default.
MMS
(Menu 5.9.2)
You can configure default MMS settings.
•
Sending options: set up the following options for
sending a multimedia message:
Priority: set the priority level of your messages.
Validity period: set the length of time your
messages are stored in the message centre.
53
Advertisement
Table of Contents
