Strymon blueSky User Manual page 37

blueSky
- reverberator
Live Edit Controls - Quick Reference
blueSky provides adjust several secondary functions that are available
on the controls� (Also, see
Edit functions are saved per preset�
1 Press and hold the ON footswitch until both LEDs blink to enter Live
Edit mode�
2 Release the footswitch and use the controls as described below�
3 Press ON footswitch to store your setting and exit Live Edit mode�
BOOST/CUT
See page 7 for an
illustrated description�
MIDI EXPRESSION
See page 8 for an
illustrated description�
NOTE: Also see "Expression Pedal Setup" on page 14
pedal functionality per preset�
"Live Edit Functions" on page
Turn the MIX knob to set a level boost or cut when
the pedal is engaged� The ON LED changes from
GREEN (-3dB to unity) to
the knob is adjusted
Unity gain is at 12 o'clock (default)
Set the VERB type switch to plate (up) or to spring
(down)—status is momentarily shown on both
LEDs
• plate position: ON,
• spring position: OFF,
7)� Live
AMBER (unity to +3dB) as
BLUE (default)
RED
to configure your
pg 37