Page 1
2010-5156 2012-06-29 HYDRO‐FORCE FLOWCLEAR CHLORINATOR. MODEL 58215 CHLORINE GENERATOR CONTROLS BACTERIA AND ALGAE In Swimming Pool Waters DOMESTIC A maximum of 27311 L of water can be treated with one Hydro‐Force Flowclear Chlorinator. Maximum output of hypochlorous acid equivalent to 0.096 kg of free available chlorine per day. For swimming pools, a range of 1‐3 ppm of free chlorine must be maintained. READ THE LABEL AND OPERATING MANUAL BEFORE USING KEEP OUT OF REACH OF CHILDREN REGISTRATION NO. 30383 PEST CONTROL PRODUCTS ACT Registrant: Bestway Inflatables & Materials Corp. NO. 3065 Cao An Road Jiading, Shanghai, China 201812. Agent: Bestway Inflatables North America 4‐2679 Bristol Circle Winston Business Park Oakville, Ontario Canada L6H 6Z8 1‐866‐903‐3986 WARNING: Operating Hydro‐Force Flowclear Chlorinator without water flow through the cell can cause a build up of flammable gases which can result in FIRE OR EXPLOSION. ...
Page 2
REPLACEMENT CELL FOR HYDRO‐FORCE FLOWCLEAR CHLORINATOR MODEL 58215 Replacement cell for the chlorine generating device Hydro‐Force Flowclear Chlorinator Model 58215. REGISTRATION NUMBER 30383 PEST CONTROL PRODUCTS ACT. This cell must only be used on this model of chlorine generating device. Read the Label, the Installation Manual and Operation Manual of the chlorine generating device [Hydro‐ Force Flowclear Chlorinator Model 58215] before using. Bestway Inflatables & Materials Corp 4‐2679 Bristol Circle Winston Business Park Oakville, Ontario L6H 6Z8 ...
Page 3
Model: #58215 110-120V~60Hz, 1.5A Hydro-Force Flowclear Chlorinator™ DO NOT RETURN TO YOUR RETAILER. QUESTIONS, PROBLEMS, MISSING PARTS WITH THIS PRODUCT? PLEASE CALL OUR AFTERSALES SERVICE DEPARTMENT 8:30AM TO 5:30PM MOUNTAIN STANDARD TIME (GMT-7) MONDAY THROUGH FRIDAY. PHONE 1-866-903-3986 http://www.bestway-service.com Email:...
Page 4
HYDRO-FORCE FLOWCLEAR CHLORINATOR. MODEL 58215 CHLORINE GENERATOR CONTROLS BACTERIA AND ALGAE Swimming Pool Waters DOMESTIC A maximum of 27311 L of water can be treated with one Hydro-Force Flowclear Chlorinator. Maximum output of hypochlorous acid equivalent to 0.096 kg of free available chlorine per day.
SAFETY INSTRUCTIONS When installing and using electrical equipment, basic safety precautions should always be followed: IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS. WARNING WARNING: To reduce the risk of injury, do not permit children to operate this device. WARNING: RISK OF ELECTRIC SHOCK-Connect only a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI).
CAUTION: For continued protection against possible electric shock this unit is to be mounted to the base in accordance with the installation instructions. NOTE: Please examine equipment before use. Notify Bestway at the customer service address listed on this manual for any damaged or missing parts at the time of purchase. Verify that the equipment components represent the models that you intended to purchase.
Page 8
• Flow Sensor The flow sensor protects the electrolytic cell and assures that will always be adequate water flowing through the cell. When the water flow drops below the minimum flow rate, the electrolytic cell will automatically shut down to protect the titanium plates and no chlorine will be produced. •...
PARTS REFERENCE Before assembly, take a few minutes to become familiar with all the parts. NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to scale.
POOL WATER CHEMISTRY Minimum Ideal Maximum Optimum Pool Water Chemistry Conditions It is recommended that the following pool water chemistry conditions be checked daily and maintained. This will help to protect pool users, pool related equipment and surfaces in and around the pool. These values are important to maintaining the pool equipment in proper operating condition and preventing corrosion or other problems.
Page 11
Drain and refill approximately 20% of the pool’s water until the Red LED salt level light disappears with the Green LED salt level light on. Table 1. Bestway Pools Salt This table shows the Quantity of salt needed to achieve the desired 4500ppm salt level and quantity of salt...
Page 12
Table 2. Bestway Pools Operating Time This table shows the Operating time needed for normal use of the chlorinator with pools. Table 3. Non-Bestway Pools Salt Table 4. Salt Calculation for Pools...
Table 5. Non-Bestway Pools Operating Time INSTALLATION INSTRUCTIONS NOTE: The preferred installation is that the chlorinator installed as the last piece of pool equipment in the return line to the pool. This will extend the life of the titanium plates and maintain its performance 1.
Page 14
For connection to filter pumps / sand filters with 38mm (1-1/2in.) hose size, and 3028 L (800 gallons) (pump capacity) sand filters: 1. If your aboveground pool is filled with water, close the connection valves before the chlorinator installation, which will prevent water from flowing out of the pool. Jump to step 2 directly if your pool is empty.
Page 15
If you can’t connect your chlorinator to the filter pump / sand filter, follow below instructions. 1. If your aboveground pool is filled with water, close the connection valves before the chlorinator installation, which will prevent water from flowing out of the pool. Jump to step 2 directly if your pool is empty.
OPERATION INSTRUCTIONS NOTE: After the salt is dissolved, but before operating the chlorinator be sure that: • The filter pump/sand filter and the chlorinator are connected to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). • The filter pump/sand filter operates several minutes before operating the chlorinator. This removes air pockets and debris in the water hoses.
flow will be checked and the corresponding LED indicators will be displayed. The unit will now operate for the operating time you set at the same time each day. NOTE: The default operating time is 2 hours. NOTE: The chlorinator will not operate if the filter pump/sand filter is not operating. NOTE: With locking the time buttons into this setting, you will have prevented unauthorized changing of the operating time.
Page 18
Salt Level Status LED Indicators The product can automatically checks the salt level of pool water and displays the levels as follows when it is operating: • Red: High salt. The pool water salt level is too high. The chlorinator is shut down and no chlorine is being produced.
More and Less Time Buttons The More and Less buttons control the operating time of the chlorinator. • More: Increases the operating time of the chlorinator in 2 hours increments. For example, the operating time display is showing 2 (hours). After pressing the More button, the 4 (hours) indicator light will also light up.
8. Reinstall the electrolytic cell reversing steps 3, 4, 5 & 6. (Reset the operating time of the chlorinator) When replacing the cell, only use replacement cells having a label that clearly states that it is a replacement cell for the chlorine generating device. Hydro-Force Flowclear Chlorinator Model 58215, REGISTRATION NUMBER 30383, PEST CONTROL PRODUCTS ACT.
TROUBLESHOOTING Bestway strives to provide the best trouble-free chlorinator on the market. If you experience any problem, do not hesitate to contact your authorized dealer or us. Here are some helpful tips to help you to diagnose and rectify common sources of trouble.
Page 22
Bestway® is not responsible for any economic loss due to water or chemical costs. Bestway® will not replace any products deemed to have been neglected or having been used beyond the owner’s manual guidelines.
Page 23
You have to send a copy of your purchase receipt together with this fax. In order to best assist you, we request all information you provide is complete and accurate. YOU CAN ALSO VISIT OUR WEB SITE: www.bestway-service.com 1-855-838-3888 http://www.bestway-service.com E-mail: aftersales@bestway-northamerica.com...
Need help?
Do you have a question about the 58215 and is the answer not in the manual?
Questions and answers