Samsung SyncMaster 400TSn User Manual page 10

24. Up-Down Left-Right but-
tons
25. EXIT
26. SRS
27.MagicInfo
28. P.MODE
29. DUAL/MTS
30. PIP
31.SWAP
Mechanical Layout (400TSn)
Mechanical Layout
Introduction
Moves from one menu item to another horizontally, vertically or
adjusts selected menu values.
Exits from the menu screen.
Selects SRS TruSurround XT mode.
MagicInfo Quick Launch Button.
When you press this button, current picture mode is displayed on
the lower center of the screen.
AV / HDMI / TV : P.MODE
The LCD Display has four automatic picture settings that are pre-
set at the factory. Then push button again to circle through avail-
able preconfigured modes. ( Dynamic → Standard → Movie
→ Custom )
PC / DVI / MagicInfo: M/B (MagicBright)
MagicBright is a feature providing the optimum viewing envi-
ronment depending on the contents of the image you are watching.
Then push button again to circle through available preconfigured
modes. (Entertain → Internet → Text → Custom )
DUAL-
STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM
MONO/NICAM STEREO can be operated depending on the
broadcasting type by using the DUAL button on the remote control
while watching TV.
MTS-
You can select MTS (Multichannel Television Stereo) mode.
Audio Type
FM Stereo Mono
Stereo
SAP
Every time you press the button, a PIP screen appears.
- This fuction does not work for this LCD Display.
Swaps the contents of the PIP and main image. The image in the
PIP window will appear on the main screen, and the main screen
image will appear in the PIP window.
- This fuction does not work for this LCD Display.
MTS/S_Mode Default
Mono Manual Change
Mono ↔ Stereo
Mono ↔ SAP
Mono