Advertisement
Quick Links
Advertisement
Summary of Contents for Dartek PED 02-10
- Page 1 PED 02-10 ELECTRIC DRILL...
- Page 2 3. Prevent accidental start. Ensure that the switch is in General Safety Warnings Safety Instruction the off position when connecting the power supply For Electric Tools and/or battery box, picking up or carrying tools. Warning! Read all warnings and instructions. Putting a finger on a switch that has been turned on Failure to follow the below warnings and or inserting a plug while the switch is on may cause...
- Page 3 II and III tools must be placed outside the workplace. When operating in a narrow workplace, someone should be guarded outside. Model PED 02-10 12. In working environments such as hot, humid, rain Rated voltage 220V ～...
- Page 4 Note: • The drill speed cannot be increased by firmly holding the tool. Actually， the drill bit can be damaged by this excessive pressure, which is not benefit for the tool operation and will reduce the Trigger Switch tool life. Lock Button •...
-
Page 5: Inspection And Repair
9. After the electrical insulation part of the tool is repaired, Inspection and Repair the dielectric strength test must be carried out according to the requirements of Table 2. 1. The custodian must conduct a daily inspection Table 2 when the tool is sent out or taken back: the user Test voltage/V must conduct a daily inspection before use. - Page 6 DARTEK TECHNOLOGY UK LIMITID Chase Business Centre, 39-41 Chase Side, London, England, N14 5BP E-mail:dartek@jsdayi.com Http://www.dartek.com...
Need help?
Do you have a question about the PED 02-10 and is the answer not in the manual?
Questions and answers