Advertisement
Quick Links
Advertisement
Related Manuals for ZANE ARTS LT-201
Summary of Contents for ZANE ARTS LT-201
- Page 1 L T - 2 0 1 / O Z H A N G E R M A N U A L - V e r 1 . 0 1...
- Page 2 Please be sure to read the manual before using this product. If you have any questions or if there is a problem with the product, please contact the store where you purchased the product or us directly. ■ CONTENTS / PART NAMES Hook Driving Rod Hole for...
- Page 3 ■ ABOUT THIS PRODUCT Please take some time to understand the characteristics of this product before using it. Maximum Load 3kg The maximum load capacity is 3kg. For fuel-burning lanterns, such as gas or kerosene, the lantern should weigh 3 kg or less with fuel.
- Page 4 ■ HANDLING PRECAUTIONS Be sure to read and understand the following contents before use to prevent harm to the user and others, and damage to property. INDICATES CONTENT THAT MAY RESULT IN DEATH OR SERIOUS INJURY. DANGER ● High risk of fire. Never use gas, gasoline, or kerosene lanterns under or near flammable objects such as tents, shelters, tarps, and trees.
- Page 5 ● The maximum load capacity is 3kg. Be sure your gas or kerosene lantern weighs 3kg or less with fuel. ● Do not use this product in places where the ground is too loose or too hard to properly secure the driving rod. ●...
- Page 6 INDICATES CONTENT THAT MAY CAUSE INJURIES OR PROPERTY DAMAGE. WARNING ● This product is for temporary outdoor use only. Do not install permanently or use in undesignated ways. ● After attaching the main unit to the driving rod, never attempt to correct the angle of the driving rod by leveraging the hanger.
- Page 7 ■ SETUP PROCEDURES Button Lock MAIN UNIT ASSEMBLY Lock sections A, B and C with button locks. The hanger can also be used at a lower height by removing section B. Securely locked Section A Section B Section C...
- Page 8 DRIVE RODE INTO GROUND Use a hammer to vertically drive the rod into the ground. Using the gauge line, drive the rod up to the 30 cm gauge line. If the ground is too hard to reach 30 cm, 20 cm to as a guide. After driving, make sure that the driving rod is secure.
- Page 9 ATTACHING THE HANGER TO THE DRIVING ROD Attach hanger to driving rod by sliding into place, tighten lock screw. ※ After attaching the main unit to the driving rod, never attempt to correct the angle of the driving rod by leveraging the hanger. This may damage the hanger. Main Unit Holder...
- Page 10 HANG A LANTERN Hang a lantern on the hook The maximum load capacity is 3kg (for fuel-burning lanterns, such as gas or kerosene, the lantern should weigh 3kg or less with fuel). Always remove lanterns from the hanger in high winds, when sleeping, and when away.
- Page 11 ■ REMOVAL If the driving rod is difficult to remove, insert a peg or other object into the hole in the driving rod, rotate back and forth and pull to remove. Peg or other object Ground...
- Page 12 ■ WARRANTY AND REPAIR If you find any defects in the product, please contact the store where you purchased it or us directly. We will replace or repair any item found to have a manufacturing defect free of charge. We will repair products with damage caused by wear and aging at a reasonable price.
Need help?
Do you have a question about the LT-201 and is the answer not in the manual?
Questions and answers