Table of Contents
Advertisement
4.2 Characteristic change
If at this point channel 1 outputs 6000 when the actual measured temperature is 600° C, channel 2 outputs 1200 when the
actual measured temperature is 120° C and channel 3 outputs 2480 when the actual measured temperature is 248° F. Receive the
average conversion result with data registers D1, D2 and D3. The changes are shown in Figure 4-4. Note that the characteristic
changes are all in degrees Celsius. The range for setting the change value is within ± 1000 (± 100° C).
5 Installation
5.1 Installation size
Figure 4-3 Third channel setup
Figure 4-4 Channel characteristics change setting
9 1 . 7
Figure 5-1 Mounting dimensions (in mm)
6
4 0
3 2
V E I C H I
R U N
E R R
V C - 4 P T
Advertisement
Table of Contents
