Downmix Setting; Using Test Tone Mode; Center Delay Setting; Rear Delay Setting - Saba 31-5023 Owner's Manual

Saba dvd player user manual
Table of Contents

Advertisement

Basic setup

DOWNMIX setting

This setting will affect the audio output signal when
playing DVD discs recorded with surround multi-channel
audio. To select one of the following Downmix settings,
use the setup menu, select speaker settings to access
the DOWNMIX menu
LT/RT: For use with an external amplifier or television
with a Dolby Pro Logic decoder.
LO/RO:
For use with a stereo amplifier/receiver or
television
stereo.
Notes:
The default setting is LT/RT.
If you are not getting any output from the speakers
connected to this system, change the setting to LO/RO.
Using the test tone mode
We recommend that you use the test tone mode after
you have set up and connected your speakers to check
the balance level and connections of each speaker.
Use the setup menu to select speaker setup, to arrive at
the following screen:
Turn this function to ON to test each speaker individually
with a two second pink sound. The location of the
speaker will be displayed on the television screen and the
front display panel, as each speaker is being tested.
NOTE: When performing
volume of the pink noise from the subwoofer to be lower
than the volume of the pink noise from the center, front
and rear speakers.
with
conventional
2-channel
g this test, it is common for the
this test, it is common for the

Center delay setting

The center delay can be adjusted in Dolby Digital mode. To
change this setting, use the setup menu, select speaker
setup to access the following screen:
Select the desired delay time of the center speaker as
follows: OFF, 3MS, 6MS, 9MS, 12MS, 15MS.
NOTE: The default setting is 15ms. We recommend that you
change it to 9ms.

Rear delay setting

The rear delay can be adjusted in Dolby Digital mode. To
change this setting, use the setup menu, select speaker
setup to access the following screen:
Select the desired delay time of the surround speaker as
follows: OFF, 3MS, 6MS, 9MS, 12MS, 15MS.
NOTE: The default setting is 15ms. We recommend that you
change it to 9ms.
17

Advertisement

Table of Contents
loading

Table of Contents