Table of Contents
Advertisement
Quick Links
USE, INSTALLATION AND MAINTENANCE
INSTRUCTIONS FOR ELECTRICAL
Dear User,
we are sincerely grateful to you for purchasing one of our products.
We are sure that the appliance modern, functional and easy to use, built with the finest materials
and components will satisfy all your needs.
We would ask that you read the instructions within this booklet very carefully so as to enable you
to obtain quality results from the outsets.
The appliance must be installed only by a qualified electrician in compliance with the
instructions provided. The manufacturer declines all responsability for improper installation.
MODEL: PT1356 - PT1358
The manufacturer is not responsible for any transcription errors or misprints contained in this handbook and,
furthermore, reserves the right to make any modification on the products, which might be deemed
necessary or usefull, this being in the user's interest, without altering their basic operating or safety
features. This cook top was designed to be used exclusively as a cooking appliance: any other use
(such as heating rooms) is to be considered improper and dangerous.
BUILT-IN HOT PLATES
COD. 04073DN - 24.06.2016
Advertisement
Table of Contents
Summary of Contents for allpa PT1356
- Page 1 The appliance must be installed only by a qualified electrician in compliance with the instructions provided. The manufacturer declines all responsability for improper installation. MODEL: PT1356 - PT1358 The manufacturer is not responsible for any transcription errors or misprints contained in this handbook and, furthermore, reserves the right to make any modification on the products, which might be deemed necessary or usefull, this being in the user’s interest, without altering their basic operating or safety...
- Page 2 WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe...
- Page 3 DESCRIPTION OF THE HOT PLATES TYPE: PCZ VTC 30 TYPE: PCZ VTC 6077 MODEL: PT1356 MODEL: PT1358 The appliance has 2/4 heating elements of different sizes and power levels. The heating elements are of the Hi-light type, which come on after a few seconds, and the heat is adjusted using the controls on the front panel, from a minimum of 1 to a maximum of 9.
- Page 4 DESCRIPTION OF THE HOT PLATES DESCRIPTION OF THE FRONT PANEL CONTROLS MODEL: PT1356 1 - Heating element 1 – button 2 - Heating element 1 + button 3 - ON/OFF button 4 - Clock programming – button 5 - Clock...
- Page 5 DESCRIPTION OF THE HOT PLATES WARNING FOR USE: ► the appliance is built to perform the following function: cooking and heating food. Every other use must be considered improper. ► Never use this appliance to heat the environment. ► Do not attempt to change the technical characteristics of the product because it can be dangerous.
- Page 6 The first time the hob is connected to the electricity supply, an operating check will be run automatically and all the warning lights will come on for several seconds. MODEL: PT1356 2) ARRANGEMENT OF THE HEATING ELEMENTS CENTRAL REAR...
-
Page 7: Residual Heat
DESCRIPTION OF THE HOT PLATES 4) FUNCTIONS COMMON TO ALL MODELS Lock function ( ): this function prevents the hob from being switched on accidentally (childproof safety device). To activate it, the sensor must be pressed for about three seconds (the warning light comes on). - Page 8 DESCRIPTION OF THE HOT PLATES MODEL: PT1358 8) ARRANGEMENT OF THE HEATING ELEMENTS LEFT ANTERIOR LEFT REAR RIGHT REAR RIGHT ANTERIOR When idle, the hob will be completely switched off. After switching on the hob by pressing the button, use the button to activate the heating element required (the indicator flashes) then use the buttons to adjust the cooking level...
- Page 9 DESCRIPTION OF THE HOT PLATES 10) HEAT-UP FUNCTIONS This function takes the cooking level to maximum power for a defined time. Activate the heat-up function After removing the control panel lock (pressing the symbol for 2 seconds), switch on the hob by pressing the button for a few seconds.
- Page 10 DESCRIPTION OF THE HOT PLATES 11) FUNCTIONS COMMON TO ALL MODELS Lock function ( ): this function prevents the hob from being switched on accidentally (childproof safety device). To activate it, the sensor must be pressed for about three seconds (the warning light comes on).
-
Page 11: Guide To Cooking
15) GUIDE TO COOKING The table (FIG.1) below indicates the power values that can be set and the type of food to prepare is shown next to each one. The values can change according to the amount of food and consumer preference. - Page 12 WARNINGS: - If the glass cracks, please, disconnect the appliance. for a correct use, please look at fig. 2 and - Don’t use plastic pots or alluminium sheets. remind: - Don’t use hob as a supplementary surface. - switch on the electricity only after having - Containers wider than the unit are not placed the pot on the cooking zone.
- Page 13 CLEANING Before any cleaning operation, disconnect the with sugar. In this case turn the switch off appliance from the electric circuit. and clean the surface with hot water and a CLEANING sponge. 16) ELECTRIC HOB - After a period of time may appear metal reflex If you want to preserve the surface clean and and scratches (fig.
-
Page 14: Installation
INSTALLATION TECHNICAL INSTRUCTIONS 17) INSERTING FOR THE INSTALLER After having cleared out all the packing INSTALLATION Installation, transformations and maintenances components, make sure of the integrity of the below listed, may only be carried out by a appliance. competent technician. TECHNICAL INSTRUCTIONS 17) INSERTING Please keep children away from all packing... - Page 15 INSTALLATION - Position the hob in the hole in the unit and fasten 18) FIXING it in place using the appropriate screws “F” of the A special sealing strip underneath the hob for INSTALLATION fastening hooks “G” (see fig. 7). damage.
- Page 16 INSTALLATION MODEL: PT1356 POSITION HOOKS ON THE BOTTOM FIG. 8 FIG. 9 MODEL: PT1358 FIG. 10 FIG. 11...
-
Page 17: Electrical Connection
INSTALLATION 19) ELECTRICAL CONNECTION When the connection has been done directly to the input system: - interpose between the appliance and the system IMPORTANT: the appliance must be installed an onnipolar switch, adequate to the load of the following the manufacturer's instructions. appliance, with a minimum nose between the The manufacturer will not be liable for injury contacts of 3 mm. -
Page 18: Maintenance
MAINTENANCE Before doing any action, disconnect the than "live" ones, and must respect the cautions appliance from the input power. in paragraph "ELECTRICAL CONNECTION". To reassemble the appliance repeat the inverse 20) COMPONENTS SUBSTITUTION process. To replace the components lodged in the internal 21) TECHNICAL CHARACTERISTICS OF part, is necessary to take the appliance up from the THE ELECTRICAL COMPONENTS... -
Page 19: Technical Data
TECHNICAL DATA MODEL 2 HEATING ELEMENTS (30) (2 “HI-LIGHT”) Voltage 220 – 240 V ~ Frequency 50/60 Hz Tot. Rating 3000 W MODEL 4 HEATING ELEMENTS (60) (4 “HI-LIGHT”) Voltage 220 – 240/400 - 415 V 3N ~ Frequency 50/60 Hz Tot. -
Page 20: Technical Assistance And Spare Parts
TECHNICAL ASSISTANCE AND SPARE PARTS This appliance, before leaving the factory, has been carefully tested and regulated by expert and specialized personnel in order to guarantee the best performances. Any repairs or adjustments which may be subsequently required may only be carried out by qualified personnel with the utmost care and attention.
Need help?
Do you have a question about the PT1356 and is the answer not in the manual?
Questions and answers