Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Ugin 201221
- Page 1 INSTRUCTIONS FOR USE VACUUM PUMP Rév. 201221...
-
Page 2: Table Of Contents
Instructions for use (rev 201221) VACUUM PUMP Vacuum pump SPARE PARTS ..........................2 INSTRUCTIONS FOR USE ......................3 SAFETY INSTRUCTIONS ........................3 1.1. USE ..............................3 1.2. SAFETY INSTRUCTIONS ........................3 1.3. WASTE DISPOSAL ..........................4 EC DECLARATION OF CONFORMITY ....................4 TECHNICAL INFORMATION ....................... -
Page 3: Spare Parts
Instructions for use (rev 201221) VACUUM PUMP A. SPARE PARTS N° DESCRIPTION Quantity Code UGIN Teflon cup FCE05RAC0044 11 O-ring FCE05RAC0042 12 Valve washer (lower) FCE05MEC0107 13 Valve FCE05MEC0108 17 Rec-Ring silicon FCE05RAC0043 UGIN DENTAIRE... -
Page 4: Instructions For Use
1.1. VACUUM PUMP is a hermetic group without oil bath, with non-return valve. It is recommended to be used with UGIN DENTAIRE ceramic and pressing furnaces. This equipment has to be operated only by dental professionals. VACUUM PUMP has to be used in the conditions and for the intended use in this manual. Any other use that will be made of it is considered inappropriate. -
Page 5: Waste Disposal
VACUUM PUMP is a hermetic group without oil bath, with non-return valve. It is recommended to be used with UGIN DENTAIRE ceramic and pressing furnaces. This equipment has to be operated only by professionals and in the conditions described in this manual. -
Page 6: Installation And Start-Up
Instructions for use (rev 201221) VACUUM PUMP 4. INSTALLATION AND START-UP 4.1. UNPACK Unpack VACUUM PUMP and check that it is in perfect order. Any defects can be reported to the carrier. Remember to get the carrier to sign the delivery note. -
Page 7: Start-Up
Instructions for use (rev 201221) VACUUM PUMP 4.3. START-UP The vacuum pump has standard accessories of one silencer and one set of rubber feet 4 pcs): - The silencer is for the purpose of lowering noise (upper part of the device) - the rubber feet are for reducing vibration during operation. -
Page 8: Maintenance
Instructions for use (rev 201221) VACUUM PUMP 5. MAINTENANCE Before to carry out the maintenance work and/or cleaning: - disconnected from the main power supply (unplug to mains socket), - at room temperature: wait the cooling after use (risk of burns and/or damage).
Need help?
Do you have a question about the 201221 and is the answer not in the manual?
Questions and answers