Troubleshooting - Ryobi AC04151T User Manual

 Rotate the knob on the string head to wind the string. If using a
curved shaft trimmer, knob should be rotated counterclockwise.
If using a straight shaft trimmer or brushcutter, knob should be
rotated clockwise. Wind the string until approximately 8 in. remains
protruding from each side of the string head.
note: During string trimmer operation, the string will advance auto-
matically as needed. Do not bump the string head on the ground in an
attempt to advance string.

trouBleshooting

 If line does not advance automatically, it may be twisted or stuck
inside the string head. Stop the trimmer, remove the line, and re-
install.
 If the line still does not advance properly, check to ensure the spool
and lifter assembly are installed properly and that you are using the
correct spring for your unit.
 If you have difficulty loading line, try inserting it through the other
eyelet or trimming the end of the line to remove bent or frayed
edges.
using the adaptors
Along with the Universal Auto Feed Reel Easy
String Head and pre-cut trimmer line, this
package includes the items at right, which may
be used to adapt the string head for use on the
trimmers listed in the Adaptor Chart.
Diagrams above represent order of parts
installation, however, all parts may not be
needed for your trimmer. Consult the Adaptor
Chart and use only the Adaptor Configuration
specified for your trimmer.
Craftsman is a registered trademark of Sears, Roebuck
®
and Co. Yard Machine ® , Yard-Man
Troy-Bilt , and Cub Cadet are registered trademarks
® ®
of MTD Products, Inc. Weed Eater
Poulan Pro are registered trademarks of Husqvarna
®
Holding AB LLC. Echo ® is a registered trademark of
Echo, Incorporated.
teChtroniC industries
north aMeriCa, inC.
1428 Pearman Dairy Road
Anderson, SC 29625
Phone 1-800-860-4050
www.ryobitools.com
987000-625
3-31-09 (REV:00)
universal
adaptor
Find your trimmer model in the adaptor Chart below, then use the adaptor configuration listed to
install the Auto Feed String Head Assembly on your trimmer. For units that require the universal
adaptor, insert the specified nut into the universal adaptor as shown.
note: This string head is not recommended for use on Echo straight shaft, Troy-Bilt Speed
Spool-equipped, Honda, Stihl, or Husqvarna string trimmers.
Refer to the diagrams at right to see how the pieces fit together.
Failure to use the correct adaptor, nut, spring, and bolt combination for your trimmer could
cause the string head to detach from your trimmer and result in serious personal injury and/
or property damage.
adaptor Chart
other models and brands not listed may fit with the use of the universal adaptor, a nut, the silver spring
and the silver bolt. for these units, test the adaptor with each nut to find one that tightens securely.
test the string head to ensure that the string will contact the cutter on the grass shield before operating.
if the string head does not fit with any of the adaptors or nuts supplied, contact Customer service at
1-800-860-4050 for assistance.
Model
Ryobi
Ryobi
Homelite
Homelite
MTD*
® , Bolens ® , MTD ® ,
MTD*
, Poulan , and
® ®
* MTD brands include Bolens, Cub Cadet, Troy-Bilt, Yard-Man, Yard Machines, and select
Craftsman
Poulan**
Poulan**
** Poulan brands include Poulan, Poulan Pro, Weed Eater, and select Craftsman
Craftsman
Craftsman
Echo
Washer spring
(used (Black
With nuts & silver)
a, C & d only)
Warning:
type
Curved Shaft
Straight Shaft
Curved Shaft
Straight Shaft
Curved Shaft Thread Adaptor (tightened with Tightening Tool) + Spacer
Straight Shaft Thread Adaptor (tightened with Tightening Tool) + Spacer
Curved Shaft Washer + Universal Adaptor + Nut A + Silver Spring + Silver Bolt
Straight Shaft Universal Adaptor + Nut E + Silver Spring + Silver Bolt
Straight Shaft Universal Adaptor + Nut F + Silver Spring + Silver Bolt
Curved Shaft Washer + Universal Adaptor + Nut A + Silver Spring + Silver Bolt
Curved Shaft Universal Adaptor + Nut B + Silver Spring + Silver Bolt
use black bolt
for curved shaft
trimmers.
use silver bolt
for straight
shaft trimmers
and brush-
cutters.
thread spacer tightening
adaptor tool
adaptor Configuration
Direct Fit + Black Spring + Black Bolt
Direct Fit + Silver Spring + Silver Bolt
Direct Fit + Black Spring + Black Bolt
Direct Fit + Silver Spring + Silver Bolt
+ Black Spring + Black Bolt
+ Black Spring + Black Bolt
nut Bolt
(6 sizes) (Black
& silver)