LumaSense technologies Innova-1409 Service Manual

Multipoint sampler

Hide thumbs

Table of Contents

Quick Links

Download this manual

Service Manual

Multipoint Sampler

Innova-1409

BI7717-11

Table of Contents

Need help?

Do you have a question about the Innova-1409 and is the answer not in the manual?

Questions and answers

Summary of Contents for LumaSense technologies Innova-1409

Page 1 Service Manual Multipoint Sampler Innova-1409 BI7717-11...
Page 2 _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 2 of 28...
Page 3 Center manifold UM1119A 3.1.3 6 channels Sample manifold UM1120A 3.1.4 Multipoint Sampler PCB ZD0900A Chapter 4 Parts replacements Parts replacements Fields replaceable parts. Electrical drawing of ZD0900A _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 3 of 28...
Page 4: Safety Consideration
Safety Consideration ____________________________________________________________________ Safety Consideration July 2015 _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 4 of 28...
Page 5: Safety Considerations
Note: that some gases may be absorbed by the water trapped in the filter. This will reduce the gases’ concentration. _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 5 of 28...
Page 6 Chapter 1 ____________________________________________________________________ Chapter 1 Introduction July 2015 _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 6 of 28...
Page 7 Handling of the electronic parts must be done with proper ESD equipment to avoid any possibility of an electrostatic discharge to the components. Modules returned to LumaSense Technologies A/S for repair/credit will be discarded if not properly packed in ESD material.
Page 8 Chapter 1 ____________________________________________________________________ Fig. 1.1 Schematic diagram of the 1409 Pneumatic System. _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 8 of 28...
Page 9: Front Panel
The Analyzer and Waste Air lamps indicate which way the internal 3 way valve is set. Interface: This lamp indicates that the USB interface is connected. _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 9 of 28...
Page 10 Mounting stub for connecting the sampler system of the 1409 to the inlet of an INNOVA Gas Monitor via tubing.Usable models are 1412i, 1314i, 3434i and 3436i. In the following referred to as “Gas Monitor”. Please contact LumaSense Technologies A/S for available models. Waste Air Outlet: Mounting stub for connecting the external pump to the 1409’s...
Page 11: Interconnection Diagram
Chapter 1 ____________________________________________________________________ 1.2.4 Interconnection diagram _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 11 of 28...
Page 12 Chapter 2 ____________________________________________________________________ Chapter 2 Service Software BZ7006 July 2015 _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 12 of 28...
Page 13: System Requirements
Installation of the program Run the BZ7006 Installer and follow the BZ7006 installation setup. After the installation is successfully completed, a BZ7006 icon is placed on the desktop. _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 13 of 28...
Page 14: Testing Procedure
Connect the 1409 Multipoint Sampler directly to the computer using a USB cable, INNOVA Part NO. AS0001B Now click on the USB Connect button, to connect to the attached 1409. _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 14 of 28...
Page 15 VP no. Firmware date is the firmware build date The *IDN? Button will give a text line with Name, Type, Channels and Firmware information. _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 15 of 28...
Page 16 The valve sequence test will continue if the Repeat Status and Sequence is marked before activating the Valve sequence. Stop the test by removing the mark of the Repeat Status and Sequence. _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 16 of 28...
Page 17: Closing The Program
Indicates if the 1409 firmware watch dog function has rebooted the Firmware due to a runtime error. 2.3 Closing the program Press the Esc button to exit the BZ7006 service software. _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 17 of 28...
Page 18 Chapter 3 ____________________________________________________________________ Chapter 3 Mechanical parts and PCB’s July 2015 _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 18 of 28...
Page 19 Chapter 3 ____________________________________________________________________ 3.1 Mechanical parts and PCB 3.1.1 Power supply ZG0370A 3.1.2 Center manifold UM1119A _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 19 of 28...
Page 20 Chapter 3 ____________________________________________________________________ 3.1.3 6 channels Sample manifold UM1120A _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 20 of 28...
Page 21 Sample manifold Ch. 1 - 6 Sample manifold Ch. 7 – 12 Sample manifold Ch. 13 - 18 Sample manifold Ch. 19 - 24 Center manifold 12 Vdc Power Front panel _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 21 of 28...
Page 22: Parts Replacements
Chapter 4 ____________________________________________________________________ Chapter 4 Parts replacements July 2015 _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 22 of 28...
Page 23 Follow these instructions to disassembly the cabinet and gain access to individual parts. Remove the cover caps DD0605A on the left front and back corner. Undo the 2 screws (Torx T10) and remove the left corner. _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 23 of 28...
Page 24 Chapter 4 ____________________________________________________________________ Remove the decoration strips on the left panel Undo the 4 screws. _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 24 of 28...
Page 25 Chapter 4 ____________________________________________________________________ Remove the Left panel and gently slide the top cover plate off. The 1409 is now ready for Service. _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 25 of 28...
Page 26 M2.5 x 12 Screw for the back panel YM0652 Milled nut YO2210A Metal screw holder for the back panel ZD0900A Multipoint sample PCB ZG0370A Switchmode Power Supply 12Vdc _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 26 of 28...
Page 27 Chapter 4 ____________________________________________________________________ 4.3 Electrical drawing of ZD0900A _______________________________________________________________________________________ BI7717-11 1409 Multipoint Sampler LumaSense Technologies A/S Service Manual Page 27 of 28...
Page 28 ____________________________________________________________________ 1409 LumaSense Technologies A/S Tel.:(+45) 44 20 01 00 Energivej 30 Fax: (+45) 44 20 01 01 DK-2750 Ballerup, Denmark http://www.lumasenseinc.com _____________________________________________________________________________________...