TVS King Duramax 225 LC Manual page 20

TVS King comes with DC headlamp. In this switch position,
' 'head lamp also will glow along with speedometer
lamps, tail lamps, number plate lamp and position lamp
when engine is in running condition.
b) Turn signal lamp switch (Left & Right)
On pushing the turn signal switch in left or right '
respective indicator lamps will glow in both front and rear.
It gives an indication in which direction you are turning.
To turn off turn signal lamp bring the switch to central
position.
WARNING
Always use the appropriate turn signal lamps when you
take a turn.
Switch off turn signal lamp after negotiating turn.
c) Head Lamp high/low beam switch
Press the knob towards '
the headlamp and towards '
WARNING
Use appropriate beam (High / Low) as per the traffic and
road condition for safety and comfortable riding.
18
ïð
'the
' to operate in high beam of
' to operate in low beam.
FEATURES IN YOUR VEHICLE
7. Switch assembly RH
It is located on the handlebar RH
7
a
a) Wiper motor Switch
It has two positions
ON : Wiper motor operates in this position.
OFF : Wiper motor stops operating in this position.
CAUTION
Do not operate the wiper motor on the dry wind shield
glass. During washing please ensure that the wiper
motor is wrapped with polythene sheet to prevent water
entry.
c
b